hello
i have bought new AMD machine , SA1100 SBC
on AMD i did lspci
00:00.0 Host bridge: nVidia Corporation: Unknown
device 00e1 (rev a1)
00:01.0 ISA bridge: nVidia Corporation: Unknown device
00e0 (rev a2)
00:01.1 SMBus: nVidia Corporation: Unknown device 00e4
(rev a1)
00:02.0 USB Controller: nVidia Corporation: Unknown
device 00e7 (rev a1)
00:02.1 USB Controller: nVidia Corporation: Unknown
device 00e7 (rev a1)
00:02.2 USB Controller: nVidia Corporation: Unknown
device 00e8 (rev a2)
00:06.0 Multimedia audio controller: nVidia
Corporation: Unknown device 00ea (rev a1)
00:08.0 IDE interface: nVidia Corporation: Unknown
device 00e5 (rev a2)
00:0a.0 IDE interface: nVidia Corporation: Unknown
device 00e3 (rev a2)
00:0b.0 PCI bridge: nVidia Corporation: Unknown device
00e2 (rev a2)
00:0e.0 PCI bridge: nVidia Corporation: Unknown device
00ed (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
01:00.0 VGA compatible controller: nVidia Corporation
NV34 [GeForce FX 5200] (rev a1)
02:08.0 Ethernet controller: Compex ReadyLink 2000
(rev 0a)
runing on linux-2.4.21 (RHEL WS)
i have 2.6.12 also on that
how do i go from here , how i install linux bios
i dont have command on lspci on sa1100
i trying to cross compiling for lspci
how do i start
thanking in advance
hemanth
_______________________________________________________
Too much spam in your inbox? Yahoo! Mail gives you the best spam protection for FREE! http://in.mail.yahoo.com
On Wed May 25 14:13:05 2005, Stephen.Kimball at bench.com wrote:
> Does anyone know how to build etherboot with a current version of gcc?
> I am using gcc version 3.4.3 and binutils 2.15.
> I've tried several etherboot versions up to 5.4.0.
> I know etherboot 5.2.6 with gcc 3.2.2 works, but that's an old version
of > gcc. Thanks.
Steve - Did you ever find a resolution to this? I didn't see any followups
on the mailing list. I have the same toolchain as you, so if there's a way
to avoid building another one just for Etherboot I'd like to know!
Thanks,
Steve Magnani
Greetings to all!
I hope this is the correct address to use when posting- I'm somewhat new
to the whole mailing list thing.
Anyways. I recently picked up a nice PCM-5820 Rev. B2 Board, made by
Advantech. It runs a GX1 300mhz Processor, 256mb PC100 Ram (SODIMM), and
2 40gb Samsung IDE Drives.
The unit also has 2 USB 1.1 ports, AC97 Audio, Realtek RL8139 10/10
Ethernet.
I'm planning on running Linux, probably Fedora Core 3/4 on the machine,
as a VPN endpoint and network server serving up SMB/NFS. It might
eventually be used as a MP3 player for my home theater system, so I do
need audio capabilities. The two USB ports are being dedicated to a
Crystalfontz 635 and 634 displays, which will be used to monitor and
control the system heedlessly.
I'm wondering- will LinuxBIOS run on this machine properly? It has no
expansion so-to-say, just PC104 which will remain unused. I've heard
things about the Audio and Graphics for the unit, but nothing definite.
Will this board run LinuxBIOS, with Video and Audio capabilities?
If I have to, I'll grab one of those nifty swap-a-bios chips that lets
me select between the Advantech Phoenix BIOS and the Linux BIOS. This
system will be encased in a acrylic case (custom made, laser cut), so
this is more of a hobby then anything else, but I'd like to have a
system running Linux that boots Linux BIOS for the kick of it.
Cheers!
Keven Tipping
Hemanth wrote:
> i have p4-2.4GHz , and 256MB RAM,
> linux-2.4.20-8(redhat) and linux-2.6-12
> gcc-3.2
> i want try on this board
> later i want to try on SA1100
> does SA1100 is supported
Boot Linux on both mainboards (if possible) with the original BIOS
installed and run lspci. lspci will display all PCI devices.
Post your question again with the lspci output.
More detailed comments:
There are very few Pentium 4 mainboards supported by LinuxBIOS.
Support for Opteron and AMD64 mainboards is much better.
The SA1100 is a StrongARM processor. Is that what you meant?
Or, is SA1100 also the name of a mainboard and you want to know if the
mainboard SA1100 is supported?
Please provide more information like a URL to the products you are
interested in having LinuxBIOS support for. Or, as mentioned above,
just provide the Linux lspci output.
Sincerely,
Ken Fuchs <kfuchs(a)winternet.com>
hello
i am new to linuxbios,
i have p4-2.4GHz , and 256MB RAM,
linux-2.4.20-8(redhat) and linux-2.6-12
gcc-3.2
i want try on this board
later i want to try on SA1100
does SA1100 is supported
and where can iget doc for linuxbios
thanking u
hemanth
__________________________________________________________
How much free photo storage do you get? Store your friends 'n family snaps for FREE with Yahoo! Photos http://in.photos.yahoo.com
Congratulations, Ron! "Porting LinuxBIOS to the AMD SC520" is a
wonderful article. It describes very well the basics required by a
LinuxBIOS newbie to understand LinuxBIOS and potentially do his own
port to a new motherboard. It also had enough detail to make it
interesting to those of us who have been using and developing
LinuxBIOS for months or even years.
The article is on-line at:
http://www.linuxjournal.com/article/8120
Thank you Linux Journal for publishing and especially publishing it
immediately on-line. (Linux Journal plans to use LinuxBIOS in next
year's Ultimate Linux Box.)
I hope Ron's article inspires scores of developers to join the
LinuxBIOS project and enable us to port LinuxBIOS to all the high
volume server/desktop/laptop/embedded mainboards plus all the lower
volume mainboards that are particularly suited to all project member's
applications.
Sincerely,
Ken Fuchs <kfuchs(a)winternet.com>
First attempt at adding support for this chip in flash_rom. It's
basically the same as a W49F002U, only different total and page sizes.
Attached are my tla file-diffs for flash.h and flash_rom.c and also .c
and .h files for the chip itself.
I ran into something similar over the weekend, with a s2735 variant (Intel
7501 Xeon development kit) I'm working on. I had assumed it was something
I did wrong in Config.lb - I set the USB and IDE devices "on" even though
my southbridge LPC setup disables them. When I set the USB and IDE devices
"off" in Config.lb my problem went away. Not a solution, I know, but it
might help track down the problem.
Steve
