coreboot March 2004

coreboot@coreboot.org

54 participants
166 discussions

答复: 答复: 答复: 答复: flash_rom support for AMD64
by YhLu 18 Mar '04

18 Mar '04

In the Suse 9 for amd64, I can not find pci/pci.h. Where I can find the pcilib for amd64? YH -----邮件原件----- 发件人: Li-Ta Lo [mailto:ollie@lanl.gov] 发送时间: 2004年3月18日 10:03 收件人: YhLu 抄送: Hendricks David W.; LinuxBIOS 主题: Re: 答复: 答复: 答复: flash_rom support for AMD64 On Thu, 2004-03-18 at 11:05, YhLu wrote: > So you mean the flash_rom is 64 bit? > I think I have tried that Kernel(64bit)+initrd (64 bit) (64 bit lib and 32 > bit libs) + flash_rom (32 bit). It's OK. > I don't know if the lib is 64bit. It should be. The flash_rom should be 64bit too. Ollie

4 5

答复: 答复: 答复: flash_rom support for AMD64
by YhLu 18 Mar '04

18 Mar '04

So you mean the flash_rom is 64 bit? I think I have tried that Kernel(64bit)+initrd (64 bit) (64 bit lib and 32 bit libs) + flash_rom (32 bit). It's OK. YH -----邮件原件----- 发件人: Li-Ta Lo [mailto:ollie@lanl.gov] 发送时间: 2004年3月18日 9:56 收件人: YhLu 抄送: Hendricks David W.; LinuxBIOS 主题: Re: 答复: 答复: flash_rom support for AMD64 On Thu, 2004-03-18 at 10:57, YhLu wrote: > The rom that shipped with s2885 should be pmc49fl004. > The flash_rom already include support amd8111 and pmc49fl004. > Yea, we just try to add some more support for different flash parts. The point is, it works FINE under 32-bits mode but fails in 64-bits mode. Did you try to flash in 64-bits mode ? Ollie > YH > > -----邮件原件----- > 发件人: Li-Ta Lo [mailto:ollie@lanl.gov] > 发送时间: 2004年3月18日 9:14 > 收件人: YhLu > 抄送: Hendricks David W.; LinuxBIOS > 主题: Re: 答复: flash_rom support for AMD64 > > On Wed, 2004-03-17 at 18:06, YhLu wrote: > > Which MB or flash chip model? > > > > Tyan s2885 with sst49lf040. > > Ollie > >

2 1

答复: 答复: flash_rom support for AMD64
by YhLu 18 Mar '04

18 Mar '04

The rom that shipped with s2885 should be pmc49fl004. The flash_rom already include support amd8111 and pmc49fl004. YH -----邮件原件----- 发件人: Li-Ta Lo [mailto:ollie@lanl.gov] 发送时间: 2004年3月18日 9:14 收件人: YhLu 抄送: Hendricks David W.; LinuxBIOS 主题: Re: 答复: flash_rom support for AMD64 On Wed, 2004-03-17 at 18:06, YhLu wrote: > Which MB or flash chip model? > Tyan s2885 with sst49lf040. Ollie

2 1

答复: flash_rom support for AMD64
by YhLu 18 Mar '04

18 Mar '04

Which MB or flash chip model? -----邮件原件----- 发件人: Hendricks David W. [mailto:dwh@lanl.gov] 发送时间: 2004年3月17日 16:52 收件人: linuxbios(a)clustermatic.org 主题: flash_rom support for AMD64 Has anyone else attempted to use flash_rom on an AMD64 platform? Ollie figured out that the BIOS offset was incorrectly set, but even after fixing that the flash_rom program still gives us a lot of errors in 64-bit SuSE 9 while working perfectly in 32-bit Gentoo. _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

2 1

changing the default paylolad
by Frank 18 Mar '04

18 Mar '04

Sorry for what may appear to be a stupid question but the answer isn't really obvious since various config files are scattered all over the place. How do I specify which file I am going to use for the payload. I tried changing the make.base file and the Makefile but have been unsuccessful so far. I want to use a text file (/etc/hosts) but can't figure out where to make the change... __________________________________ Do you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam http://mail.yahoo.com

3 7

ASUS P2B-DS and MD2202-D32
by Huebner, Andreas 18 Mar '04

18 Mar '04

Hi all, I want to use an ASUS P2B-DS dual P-III mainboard with a MD2202-D32 DoC device for LinuxBIOS. In the moment I test it with a 2.6.4 kernel. This board uses a 440bx chip set. I hot swapped the BIOS Flash chip and the DoC while the board was powered on and Linux was running. When I modprobe nftl and docprobe I get the following messages in /var/log/messages: kernel: NFTL driver: nftlcore.c $Revision: 1.94 $, nftlmount.c $Revision: 1.34 $ kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffc8000 kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffca000 [...] kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffec000 kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffee000 kernel: No recognized DiskOnChip devices found No my question now is how to initialize the 440bx to get the DoC recognized. Here is the output of lspci. Everything except the VGA controller is onboard. 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02) 00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) 00:04.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) 00:04.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) 00:04.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) 00:04.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02) 00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890 01:00.0 VGA compatible controller: nVidia Corporation NV15 Bladerunner (GeForce2 Ultra) (rev a4) and the output of lspci -v: 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02) Flags: bus master, medium devsel, latency 64 Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: d6000000-d7dfffff Prefetchable memory behind bridge: d7f00000-e3ffffff 00:04.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:04.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 32 I/O ports at d800 [size=16] 00:04.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at d400 [size=32] 00:04.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02) Flags: medium devsel, IRQ 9 00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890 Subsystem: Adaptec 2940U2W SCSI Controller Flags: bus master, medium devsel, latency 32, IRQ 19 BIST result: 00 I/O ports at d000 [disabled] [size=256] Memory at d5800000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 1 01:00.0 VGA compatible controller: nVidia Corporation NV15 Bladerunner (GeForce2 Ultra) (rev a4) (prog-if 00 [VGA]) Subsystem: Elsa AG: Unknown device 0c56 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 16 Memory at d6000000 (32-bit, non-prefetchable) [size=16M] Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at d7ff0000 [disabled] [size=64K] Capabilities: [60] Power Management version 1 Capabilities: [44] AGP version 2.0 Thank you in advance, Andreas

1 0

ASUS P2B-DS and MD2202-D32
by linuxbios＠huebner.it 18 Mar '04

18 Mar '04

Hi all, want to use an ASUS P2B-DS dual P-III mainboard with a MD2202-D32 DoC device for LinuxBIOS. In the moment I test it with a 2.6.4 kernel. This board uses a 440bx chip set. I hot swapped the BIOS Flash chip and the DoC while the board was powered on and Linux was running. When I modprobe nftl and docprobe I get the following messages in /var/log/messages: kernel: NFTL driver: nftlcore.c $Revision: 1.94 $, nftlmount.c $Revision: 1.34 $ kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffc8000 kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffca000 [...] kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffec000 kernel: Possible DiskOnChip with unknown ChipID FF found at 0xfffee000 kernel: No recognized DiskOnChip devices found No my question now is how to initialize the 440bx to get the DoC recognized. Thank you in advance, Andreas

1 1

flash_rom support for AMD64
by Hendricks David W. 17 Mar '04

17 Mar '04

Has anyone else attempted to use flash_rom on an AMD64 platform? Ollie figured out that the BIOS offset was incorrectly set, but even after fixing that the flash_rom program still gives us a lot of errors in 64-bit SuSE 9 while working perfectly in 32-bit Gentoo.

1 0

SIS chipset
by Frank 17 Mar '04

17 Mar '04

I have an ADVANTECH board based on the SIS 552 chipset. Is there any support for this board and chip set. I looked at the status: http://www.linuxbios.org/status/index.html There is an entry for SIS but no notes. I am on a very tight schedule and any help will be greatly appreciated... __________________________________ Do you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam http://mail.yahoo.com

5 27

making without a payload
by Frank 17 Mar '04

17 Mar '04

I want to eventually use linuxbios to boot linux but for right now I just wnat to build it for my motherbord without a payload. How do i do this.. __________________________________ Do you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam http://mail.yahoo.com

3 5

← Newer
1
...
6
7
8
9
10
11
12
...
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot March 2004