coreboot March 2004

coreboot@coreboot.org

54 participants
166 discussions

Tyan Changes for 1.1.6
by YhLu 12 Mar '04

12 Mar '04

1. AMD 8131: ioapic : PCI master mem/io enable. The segment I have added in old version, in 1.1.6 Eric remove that. --- It is needed for other MBs except arima --because it connects all apic to 8111. 2. Some correction in AMD8151. 3. Add superio/Winbond/w83627hf. 4. other changs in tyan dir. (auto.c failover.c cmos.layout from arima dir) (Config.lb changes for option_table.h building and superio ...) (Increase the heap size to make elfboot work). YH -----邮件原件----- 发件人: ron minnich [mailto:rminnich@lanl.gov] 发送时间: 2004年3月11日 20:49 收件人: YhLu 抄送: linuxbios(a)clustermatic.org 主题: Re: (no subject) ok, we will get this tomorrow morning and test it here as well. It would also be helpful if you add a comment for such changes but we will try to understand what you have done. ron

4 9

答复: Tyan Changes for 1.1.6
by YhLu 12 Mar '04

12 Mar '04

Eric, In the 1.1.6, you have move clearing memory from auto.c to k8/cpufixup.c. Is there any way to disable it for fast booting? Regards YH -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月11日 21:10 收件人: ron minnich 抄送: linuxbios(a)clustermatic.org 主题: Tyan Changes for 1.1.6 1. AMD 8131: ioapic : PCI master mem/io enable. The segment I have added in old version, in 1.1.6 Eric remove that. --- It is needed for other MBs except arima --because it connects all apic to 8111. 2. Some correction in AMD8151. 3. Add superio/Winbond/w83627hf. 4. other changs in tyan dir. (auto.c failover.c cmos.layout from arima dir) (Config.lb changes for option_table.h building and superio ...) (Increase the heap size to make elfboot work). YH -----邮件原件----- 发件人: ron minnich [mailto:rminnich@lanl.gov] 发送时间: 2004年3月11日 20:49 收件人: YhLu 抄送: linuxbios(a)clustermatic.org 主题: Re: (no subject) ok, we will get this tomorrow morning and test it here as well. It would also be helpful if you add a comment for such changes but we will try to understand what you have done. ron _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

3 4

How does pre memory C code work on K8.
by maillists＠petrolhead.com 12 Mar '04

12 Mar '04

Something has been troubling me for some time which is how the code manages to run before the memory controllers are configured. The assembler I can see has no accesses to memory, but the C code does, is their some magic gcc switch that makes it be entirely register based? It's troubled me for a while one the memories up then I'm more than happy but before that I'm a little bemused. Many thanks Chris

4 4

答复: 答复: [COMMIT] linuxbios 1.1.6....
by YhLu 11 Mar '04

11 Mar '04

I'm testing that on s2880 now. -----邮件原件----- 发件人: Li-Ta Lo [mailto:ollie@lanl.gov] 发送时间: 2004年3月11日 15:25 收件人: YhLu 抄送: Hendricks David W.; Eric W. Biederman; LinuxBIOS 主题: Re: 答复: [COMMIT] linuxbios 1.1.6.... On Thu, 2004-03-11 at 16:27, YhLu wrote: > Eric, > > After using you new code, I got > > Any idea > > Regards > I can't even pass the ht enumeration. How did you do that ? Ollie > YH > > > Found ELF candiate at offset 0 > Loading Etherboot version: 5.2.0 > Dropping non PT_LOAD segment > New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 > (cleaned up) New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize > 0x6010 > Loading Segment: addr: 0x00000000effb7f38 memsz: 0x0000000000016064 filesz: > 0x0000000000006010 > Clearing Segment: addr: 0x00000000effbdf48 memsz: 0x0000000000010054 > Loading Segment: addr: 0x0000000000036064 memsz: 0x000000000002ecc3 filesz: > 0x0000000000000000 > 39:stream_skip() - overflowed source buffer > ERROR: Skip of 65620 bytes skiped 8000 bytes > Cannot Load ELF Image > > > > -----邮件原件----- > 发件人: YhLu > 发送时间: 2004年3月11日 14:43 > 收件人: Hendricks David W.; Eric W. Biederman > 抄送: LinuxBIOS > 主题: 答复: [COMMIT] linuxbios 1.1.6.... > > I'm working on it. > > -----邮件原件----- > 发件人: Hendricks David W. [mailto:dwh@lanl.gov] > 发送时间: 2004年3月11日 14:17 > 收件人: Eric W. Biederman > 抄送: LinuxBIOS > 主题: Re: [COMMIT] linuxbios 1.1.6.... > > Looks to work on the HDAMA, but the S2885 is horribly broken. Good thing > next week is my spring break :) > > _______________________________________________ > Linuxbios mailing list > Linuxbios(a)clustermatic.org > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ > Linuxbios mailing list > Linuxbios(a)clustermatic.org > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ > Linuxbios mailing list > Linuxbios(a)clustermatic.org > http://www.clustermatic.org/mailman/listinfo/linuxbios >

1 0

答复: [COMMIT] linuxbios 1.1.6....
by YhLu 11 Mar '04

11 Mar '04

Old code produce Found ELF candiate at offset 0 Loading Etherboot version: 5.2.0 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 (cleaned up) New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 Loading Segment: addr: 0x00000000dffd7d38 memsz: 0x0000000000006164 filesz: 0x0000000000006010 Clearing Segment: addr: 0x00000000dffddd48 memsz: 0x0000000000000154 Loading Segment: addr: 0x0000000000026164 memsz: 0x000000000003ebc3 filesz: 0x0000000000000000 Clearing Segment: addr: 0x0000000000026164 memsz: 0x000000000003ebc3 Jumping to boot code at 0x20000 ROM segment 0x0000 length 0x0000 reloc 0x00020000 CPU 1855 Mhz Etherboot 5.2.0 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE] Relocating _text from: [00026010,00066440) to [dfebfbd0,dff00000) Probing pci nic... -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月11日 15:28 收件人: YhLu; Hendricks David W.; Eric W. Biederman 抄送: LinuxBIOS 主题: 答复: [COMMIT] linuxbios 1.1.6.... Eric, After using you new code, I got Any idea Regards YH Found ELF candiate at offset 0 Loading Etherboot version: 5.2.0 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 (cleaned up) New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 Loading Segment: addr: 0x00000000effb7f38 memsz: 0x0000000000016064 filesz: 0x0000000000006010 Clearing Segment: addr: 0x00000000effbdf48 memsz: 0x0000000000010054 Loading Segment: addr: 0x0000000000036064 memsz: 0x000000000002ecc3 filesz: 0x0000000000000000 39:stream_skip() - overflowed source buffer ERROR: Skip of 65620 bytes skiped 8000 bytes Cannot Load ELF Image -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月11日 14:43 收件人: Hendricks David W.; Eric W. Biederman 抄送: LinuxBIOS 主题: 答复: [COMMIT] linuxbios 1.1.6.... I'm working on it. -----邮件原件----- 发件人: Hendricks David W. [mailto:dwh@lanl.gov] 发送时间: 2004年3月11日 14:17 收件人: Eric W. Biederman 抄送: LinuxBIOS 主题: Re: [COMMIT] linuxbios 1.1.6.... Looks to work on the HDAMA, but the S2885 is horribly broken. Good thing next week is my spring break :) _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

答复: [COMMIT] linuxbios 1.1.6....
by YhLu 11 Mar '04

11 Mar '04

Eric, After using you new code, I got Any idea Regards YH Found ELF candiate at offset 0 Loading Etherboot version: 5.2.0 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 (cleaned up) New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 Loading Segment: addr: 0x00000000effb7f38 memsz: 0x0000000000016064 filesz: 0x0000000000006010 Clearing Segment: addr: 0x00000000effbdf48 memsz: 0x0000000000010054 Loading Segment: addr: 0x0000000000036064 memsz: 0x000000000002ecc3 filesz: 0x0000000000000000 39:stream_skip() - overflowed source buffer ERROR: Skip of 65620 bytes skiped 8000 bytes Cannot Load ELF Image -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月11日 14:43 收件人: Hendricks David W.; Eric W. Biederman 抄送: LinuxBIOS 主题: 答复: [COMMIT] linuxbios 1.1.6.... I'm working on it. -----邮件原件----- 发件人: Hendricks David W. [mailto:dwh@lanl.gov] 发送时间: 2004年3月11日 14:17 收件人: Eric W. Biederman 抄送: LinuxBIOS 主题: Re: [COMMIT] linuxbios 1.1.6.... Looks to work on the HDAMA, but the S2885 is horribly broken. Good thing next week is my spring break :) _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

2 1

Elitegroup ECS K7SOM+ supported?
by yfede 11 Mar '04

11 Mar '04

Hello, Is there any possibility to use linuxbios on a Elitegroup ECS K7SOM+ motherboard? Do I have to get it from the CVS repository directly? The link to the daily snapshot on www.linuxbios.org site doesn't seem to work: http://cvs.sourceforge.net/cvstarballs/freebios-cvsroot.tar.gz Thanks in advance, Fede.

3 2

Is there a list or site for ...
by Lancashire, Pete 11 Mar '04

11 Mar '04

sorry to bother every one with a non linux bios question I'm going to set up a small cluster at home for self education. cost as can be expected is a concern. For now i'm looking at a cluster of 4-8 boxes. I've looked at using used PC's but the best prices i've seen for anything with a >1 Ghz Processor is $200 or more. On the flip side Wal Mart of all places has a box for $200. No fancy or fast. but better then any used price ive come across. Anyway.. does someone know of a mailing list or site for those of us who have not won a lottery ? tia, -pete

4 3

答复: [COMMIT] linuxbios 1.1.6....
by YhLu 11 Mar '04

11 Mar '04

I'm working on it. -----邮件原件----- 发件人: Hendricks David W. [mailto:dwh@lanl.gov] 发送时间: 2004年3月11日 14:17 收件人: Eric W. Biederman 抄送: LinuxBIOS 主题: Re: [COMMIT] linuxbios 1.1.6.... Looks to work on the HDAMA, but the S2885 is horribly broken. Good thing next week is my spring break :) _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

Epia-M IDE HowTo
by linuxbios＠chvojka.at 11 Mar '04

11 Mar '04

Hi, I have a EPIA-M (ME6000) and I want to use Linuxbios for my HTPC. So I want to boot from hd. Is there anywhere a good HowTo for this. The HowTo in the cvs for talks only about etherboot. greetz

3 2

← Newer
1
...
10
11
12
13
14
15
16
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot March 2004