YES
-----Original Message----- From: Gin [mailto:ginlin@nexcom.com.tw] Sent: Wednesday, November 10, 2004 11:03 PM To: 'Steven James' Cc: linuxbios@clustermatic.org Subject: Tyan/s2735
Steven, Thanks for the info. I've got the ram up by filling the some values in North Bridge(I reference a regular bios).
I have an essential question about the code base for Tyan/s2735. Has it ever successfully built and run on that board? I have to make sure the code I am currently building our board on is good.
Thanks
-----Original Message----- From: linuxbios-admin@clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Steven James Sent: Friday, November 05, 2004 10:40 PM To: Gin Lin Cc: linuxbios@clustermatic.org Subject: Re: ram init
Greetings,
It's been a while since I've looked at it, but when I last looked, it did sometimes need power cycled to restart. I worked around that by making the kernel reboot by writing 0x0e to port 0xcf9. That causes the southbridge to do a 3 second power off.
G'day, sjames
On Fri, 5 Nov 2004, Gin Lin wrote:
Does anyone know if the raminit.c under intel/E7501 is stable enough?
I am
having a problem with the system reseting when it jumps to the first
address
in the ram. Could the procedures of writing NorthBrige registers have problems?
thanks, Gin _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
||||| |||| ||||||||||||| ||| by Linux Labs International, Inc. Steven James, CTO
55 Marietta Street Suite 1830 Atlanta, Ga 30303 866 824 9737 support
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
-
YhLu