Currently flashrom defines the ST M50FW016 and M50FW040 to use jedec commands, but these chips don't support them, as far as I can tell. They do support the 82802ab command set, however.
I tested this patch with an M50FW016. I don't have an M50FW040 but the datasheet indicates the same command set as the M50FW016.
Signed-off-by: Ed Swierk eswierk@arastra.com
--Ed
Quoting Ed Swierk eswierk@arastra.com:
Currently flashrom defines the ST M50FW016 and M50FW040 to use jedec commands, but these chips don't support them, as far as I can tell. They do support the 82802ab command set, however.
I tested this patch with an M50FW016. I don't have an M50FW040 but the datasheet indicates the same command set as the M50FW016.
Signed-off-by: Ed Swierk eswierk@arastra.com
--Ed
Yup I had to make this change to the M50FW080 to get it to work.
Acked-by: Joseph Smith joe@smittys.pointclark.net
Thanks - Joe
On Mon, Apr 7, 2008 at 8:53 AM, joe@smittys.pointclark.net wrote:
Acked-by: Joseph Smith joe@smittys.pointclark.net
Thanks, committed in r3221.
--Ed