Coreboot RS780 problem

[Grant 吳明祐]

Hi all,

Coreboot just added support for RS780 chipset.

My mainboard is AM2+RS780+SB700. 
In Coreboot, I use "make menuconfig" command to choose motherboard. 
I can only choose "AMD + Tilapia" project. 
However, it is AM3+RS780+SB700.

So how can I replace the cpu code to AM2 in coreboot?

BR 
Grant

[Marc Jones]

2010/7/1 Grant 吳明祐 :
> Hi all,
>
> Coreboot just added support for RS780 chipset.
>
> My mainboard is AM2+RS780+SB700.
> In Coreboot, I use "make menuconfig" command to choose motherboard.
> I can only choose "AMD + Tilapia" project.
> However, it is AM3+RS780+SB700.
>
> So how can I replace the cpu code to AM2 in coreboot?

Hi Grant,

Look at the AMD Mahogany_fam10 platform too. You can change the CPU
socket in the mainboard Kconfig.

Marc

"FILO setup OS" problem

[Grant 吳明祐]

Hi All,

My project is AMD K8+RS780+SB700.

Now my coreboot BIOS can boot into FILO.(SATA1: HDD, SATA3: CDROM)

GEEXBOX setup CD is in CDROM.

So I key in:
kernel hdc:/GEEXBOX/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=cdrom 
installator
But I cannot setup GEEXBOX(Message : File not found)

I change "hdc" to hda,hdb, hdc, hdd, hde, and the results are the same.
Can anyone tell me what's wrong?

Grant

"FILO setup OS" problem

[Marc Jones]

2010/7/12 Grant 吳明祐 :
> Hi All,
>
> My project is AMD K8+RS780+SB700.
>
> Now my coreboot BIOS can boot into FILO.(SATA1: HDD, SATA3: CDROM)
>
> GEEXBOX setup CD is in CDROM.
>
> So I key in:
> kernel hdc:/GEEXBOX/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=cdrom
> installator
> But I cannot setup GEEXBOX(Message : File not found)
>
> I change "hdc" to hda,hdb, hdc, hdd, hde, and the results are the same.
> Can anyone tell me what's wrong?
>
> Grant

Hi Grant,

I assume that you are using a liveCD. I don't think that will work
with filo. I have never tried. Either setup the harddrive with your
image on another machine or try booting the Seabios payload.

Marc

"FILO setup OS" problem

[Grant 吳明祐]

Hi,

Now I change FILO to Seabios.
Setuping Linux is OK.

Thanks,
Grant

________________________________
寄件者： Marc Jones 
收件者： Grant 吳明祐 
副　本： [e-mail]
寄件日期： 2010/7/13 (二) 1:45:11 PM
主　旨： Re: [coreboot] "FILO setup OS" problem

2010/7/12 Grant 吳明祐 :
> Hi All,
>
> My project is AMD K8+RS780+SB700.
>
> Now my coreboot BIOS can boot into FILO.(SATA1: HDD, SATA3: CDROM)
>
> GEEXBOX setup CD is in CDROM.
>
> So I key in:
> kernel hdc:/GEEXBOX/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=cdrom
> installator
> But I cannot setup GEEXBOX(Message : File not found)
>
> I change "hdc" to hda,hdb, hdc, hdd, hde, and the results are the same.
> Can anyone tell me what's wrong?
>
> Grant

Hi Grant,

I assume that you are using a liveCD. I don't think that will work
with filo. I have never tried. Either setup the harddrive with your
image on another machine or try booting the Seabios payload.

Marc

"FILO setup OS" problem

[Qing Pei Wang]

hi Grant,
    have you enable the ISO9660 filesystem config with filo? please enable
all of the debug level, post the log.
That would make us more clear about what's the problem

2010/7/13 Grant 吳明祐
> Hi All,
>
> My project is AMD K8+RS780+SB700.
>
> Now my coreboot BIOS can boot into FILO.(SATA1: HDD, SATA3: CDROM)
>
> GEEXBOX setup CD is in CDROM.
>
> So I key in:
> kernel hdc:/GEEXBOX/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=cdrom
> installator
> But I cannot setup GEEXBOX(Message : File not found)
>
> I change "hdc" to hda,hdb, hdc, hdd, hde, and the results are the same.
> Can anyone tell me what's wrong?
>
> Grant