hi Grant,
have you enable the ISO9660 filesystem config with filo? please enable all of the debug level, post the log.
That would make us more clear about what's the problem
Hi All,My project is AMD K8+RS780+SB700.Now my coreboot BIOS can boot into FILO.(SATA1: HDD, SATA3: CDROM)GEEXBOX setup CD is in CDROM.So I key in:
kernel hdc:/GEEXBOX/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=cdrom installator
But I cannot setup GEEXBOX(Message : File not found)I change "hdc" to hda,hdb, hdc, hdd, hde, and the results are the same.
Can anyone tell me what's wrong?Grant
--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot