Re: 440BX meminit changes testing

[Keith Hui]

Hi Branden,

I think I know why 74034 is failing. Somehow the memory row sizes were
messed up and the DRAM row boundaries were incorrectly set. I'm going
back to my userspace test jig and see if I can get that going again,
then go from there.

I'll keep you guys (including anyone watching on the mailing list) posted.

Regards
Keith

On Thu, 30 Mar 2023 at 19:05, Branden Waldner  wrote:
> I did some more testing of the patch train, but didn't manage to
> figure out where it would boot but with an unstable config.
> I skipped over 73887, since it was already merged (and master tests okay).
> 73951, 73952, 74032, and 74033 booted and ran memtest for a few
> minutes without errors
> But 74034 would fail with or without debug raminit enabled.
>
> Most of this testing was done with the pair of 128mb capable of
> 2-2-2-5 timings, but showing 3-3-3-6 as in use in memtest86.

440BX meminit changes testing

[Peter Stuge]

Keith Hui wrote:
> I'll keep you guys (including anyone watching on the mailing list) posted.

Thanks a lot. I appreciate reading along!

//Peter