AMD64+FILO -> Detected floating bus

[Stefan Reinauer]

Hi,

with LinuxBIOS 1.1.6 and Filo 0.4.1 I am getting a floating IDE bus
on the Solo machines now. This has worked before with older versions,
but I am not sure what might cause this breakage..

Any ideas?

Best regards,
  Stefan Reinauer

[Greg Watson]

Stefan,

Is the floating bus message coming from Filo or LinuxBIOS?

Greg

On 22/03/2004, at 8:26 AM, Stefan Reinauer wrote:
> Hi,
>
> with LinuxBIOS 1.1.6 and Filo 0.4.1 I am getting a floating IDE bus
> on the Solo machines now. This has worked before with older versions,
> but I am not sure what might cause this breakage..
>
> Any ideas?
>
> Best regards,
>   Stefan Reinauer

[Stefan Reinauer]

* Greg Watson  [040322 18:01]:
> Stefan,
>
> Is the floating bus message coming from Filo or LinuxBIOS?
> From Filo. It seems that there are no devices detected on the bus.

Strange enough, since the Maxtor harddrive was installed using 
LinuxBIOS and Filo a while ago..

Stefan

[Greg Watson]

Good. That means it wasn't my fault :-). I updated the IDE support in 
LinuxBIOS recently, so I thought it may have been that. Looks like 
something must have changed in Filo.

Greg

On 22/03/2004, at 10:04 AM, Stefan Reinauer wrote:
> Greg Watson  [040322 18:01]:
> > Stefan,
> >
> > Is the floating bus message coming from Filo or LinuxBIOS?
>
> From Filo. It seems that there are no devices detected on the bus.
> Strange enough, since the Maxtor harddrive was installed using
> LinuxBIOS and Filo a while ago..
>
> Stefan