-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 05/19/2017 03:45 AM, Martin A wrote:
Hi there,
In my bunch of motherboards, the only one supported by Coreboot is my old Asus M2N-E with Dual-Core AMD Opteron(tm) Processor 1216 HE and 4x 2Go Ram (2@667 and 2@800).
So I tried to run it with Coreboot an Seabios but nothing happened on screen and at the end of the boot log:
Waiting for 1 CPUS to stop
And a bit sooner in boot log
CPU ID 0x80000001: 40f33 CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
Any advice to solve it please ? Thank you.
Can you post the full boot log please?
The modern Opterons occasionally hang at that same location when the debug level is set to SPEW; something you could try is to reduce the debug level to WARNING and see if the board boots.
- -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com
Thank you very much Timothy !
debug level @ WARNING and it boots well -> a nice bootlog in a 1 or 2 seconds, so fast !!
But Seabios do not boot well:
Ubuntu 16.04 internal SATA Drive -> PnPBIOS dev_node_info funstions not avilable an this system
Windows 7 x64 USB drive -> Non ACPI Bios
Any tips/advice
Best regards.
Martin
________________________________ De : Timothy Pearson tpearson@raptorengineering.com Envoyé : vendredi 19 mai 2017 18:58 À : Martin A Cc : coreboot@coreboot.org Objet : Re: [coreboot] Asus M2N-E: Waiting for 1 CPUS to stop
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 05/19/2017 03:45 AM, Martin A wrote:
Hi there,
In my bunch of motherboards, the only one supported by Coreboot is my old Asus M2N-E with Dual-Core AMD Opteron(tm) Processor 1216 HE and 4x 2Go Ram (2@667 and 2@800).
So I tried to run it with Coreboot an Seabios but nothing happened on screen and at the end of the boot log:
Waiting for 1 CPUS to stop
And a bit sooner in boot log
CPU ID 0x80000001: 40f33 CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
Any advice to solve it please ? Thank you.
Can you post the full boot log please?
The modern Opterons occasionally hang at that same location when the debug level is set to SPEW; something you could try is to reduce the debug level to WARNING and see if the board boots.
- -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com Raptor Engineering::Home Pagehttps://www.raptorengineering.com/ www.raptorengineering.com Let Raptor Engineering handle your next high-performance digital design! We offer consulting services in: Embedded systems design; Boot firmware development (e.g ...
-
Martin A -
Timothy Pearson