-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 05/19/2017 03:45 AM, Martin A wrote:
>
>
> Hi there,
>
>
> In my bunch of motherboards, the only one supported by Coreboot is my
> old Asus M2N-E with Dual-Core AMD Opteron(tm) Processor 1216 HE and 4x
> 2Go Ram (2@667 and 2@800).
>
>
> So I tried to run it with Coreboot an Seabios but nothing happened on
> screen and at the end of the boot log:
>
> Waiting for 1 CPUS to stop
>
>
> And a bit sooner in boot log
>
> CPU ID 0x80000001: 40f33
> CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
>
> Any advice to solve it please ?
> Thank you.
>

Can you post the full boot log please?

The modern Opterons occasionally hang at that same location when the
debug level is set to SPEW; something you could try is to reduce the
debug level to WARNING and see if the board boots.

- --
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJZHyQwAAoJEK+E3vEXDOFbylkH/jnSBLmHnRt0wZAusjIBxQX5
578UF/GxZ6kDKtkGbHvwg/+TIABC8X7CEqIG49u1KDhJfQb8+jDyQ4/oEULVWyIB
DC0GEyJHOen8JJpKhTksfk5yf+qkiEIUPNCENdmM8pOUXZzryM34Ng30yHEL8nqE
v2qHMgWaAjFHC5GuQGIoXk9B7afeQbvFPA8rxOztN/7NJPOf2+xzljetquxk+rRl
Kugf8I9carM/Dod2rjX/rzO3QMpl9Wg3Ob/CvqBU0JKONjNxRcJU7UVeaOcRmNr1
neO8hdL5lCw2rRA6cR61HELC9fYNC61HkbmSX0JlcQw2XXCJd8CgTKncXMqDQ0k=
=1zxc
-----END PGP SIGNATURE-----