Re: [LinuxBIOS] CX700 support in Flashrom

[Randall Philipson]

Add CX700 Device ID

Signed-off-by: Randall Philipson 
---
OK, this time I included the patch

---- Randall Philipson  wrote:
> Add CX700 Device ID
> Signed-off-by: Randall Philipson
>
> This probably qualifies as a trivial patch since the CX700 uses the same register to enable flash programming.  But I'd appreciate it if someone could ack if for me so I can start to get a feel for this check-in process.  I've tested it with SST39SF040 and SST49LF004, at least reading and writing, and it seems to work fine. (At least on my development board).  It is my goal to get a port working for the CX700, but there are a lot of obstacles in my way.  The biggest being my lack of intellect.  We shall see.

[LinuxBIOS] CX700 support in Flashrom

[ron minnich]

on my editor the tabs did not line up? I think you can fix that on
commit, whoever commits it.

I would love to see your working CX700 port.

I am way out of date on the V2 tree, so I can not commit, but:

Acked-by: Ronald G. Minnich

[LinuxBIOS] CX700 support in Flashrom

[Stefan Reinauer]

* Randall Philipson  [070409 23:17]:
> Add CX700 Device ID
>
> Signed-off-by: Randall Philipson

great thanks. Applied in 2599

Stefan