Thanks Uwe, As you might've guessed from my other mails about IRQ_SLOT_COUNT, the CS5530 code seems to work fine as of r2776. In particular, the IDE interfaces are getting initialized properly.
thanks! Jonathan
----- Original Message ---- From: Uwe Hermann uwe@hermann-uwe.de To: Jonathan Sturges jonathansturges@yahoo.com Cc: linuxbios@linuxbios.org Sent: Thursday, September 13, 2007 8:14:14 PM Subject: Re: [LinuxBIOS] [PATCH] Reimplementation/fixing of CS5530/CS5530A southbridge code
On Wed, Aug 29, 2007 at 08:16:52PM -0700, Jonathan Sturges wrote:
I'm still having problems. The ideX_enable register values are within the "chip southbridge/amd/cs5530" context in my Config.lb, which matches the ASI mb-5blmp you cited. This is grasping at straws, but my Config.lb inconsistently uses tabs and spaces... any issues there, beyond aesthetics?
No, whitespace should not matter there.
Anyway, FWIW, I attached the Config.lb I'm working from. Any hints appreciated.
Please retry with the latest svn revision, I just committed a rewrite of the CS5530 code. I verified that it works on the ASI MB-5BLMP.
Uwe.