Re: [LinuxBIOS] MCP55 LinuxBIOS with USB debug

[Lu, Yinghai]

Maybe Nvidia fixed the bug in mcp55. AMD8111 is using DAT0...

It should use SMBHDTCMD for val with send/receive byte.

Serverworks chipset already use CMD.

YH

________________________________

From: [e-mail]
[mailto:[e-mail]] On Behalf Of bxshi
Sent: Tuesday, January 23, 2007 5:08 PM
To: Lu, Yinghai
Cc: [e-mail]
Subject: Re: [LinuxBIOS] MCP55 LinuxBIOS with USB debug

You may need to use

smbus_send_byte(hub_address, hub_channel);

or

smbus_write_byte(hub_address, hub_channel);

smbus_write_byte may need three parametres, smbus_write_byte(device
,address ,val).

for PCA9545 to enable one channel need four steps ,

1. outb(hub_address, base_io+02)

2. outb(hub_channel, base_io +03)

3. outb(0x04, base_io + 00)

4. test  inb(base_io+01)

it is a little different from PCA9556/PCA9557. as I look at the code ,
use smbus_write_byte may not make pca9545 work .

use smbus_send_byte(device,val) , I get the output:

No memory for this cpu

No memory

so I change below

outb(val, smbus_io_base + SMBHSTCMD);

then everything works fine.

so I think smbus_send_byte(device,val) ,device should be the HUB_ADDRESS
, and val is the HUB_CHANNEL. is it right?

bxshi