Dear all, My linuxbios tried to boot the linux...but has a problem..hope you can give me some advice...thanks....the message is follow: ..... ollect_sys_info: 00000000000c0000-00000 pci_init: 01:02.0 1166:0130 0604 00 pci_init: 01:03.0 1166:0132 0604 00nt addr 0x1258e0 size 0x48 offset 0 pci_init: 01:04.0 1166:0132 0604 00 pci_init: 01:05.0 1166:0132 0604 00n PT_LOAD segment pci_init: 01:06.0 1166:0132 0604 000000000000100000 memsz: 0x000000000 pci_init: 01:07.0 1166:0036 0604 00 pci_init: 01:09.0 1166:0223 0c03 10 pci_init: 01:09.1 1166:0223 0c03 10 00000000000048 pci_init: 01:09.2 1166:0223 0c03 20 FILO pci_init: 02:06.0 1000:0030 0100 00domain) Fri Jul 22 19:47:38 CST 200 pci_init: 03:04.0 14e4:1668 0200 00 pci_init: 03:04.1 14e4:1668 0200 000xe1fb007 pci_init: 08:0d.0 1166:0104 0604 00ebx = 0x1ffe9420 Press <Enter> for default boot, or <Esc> for boot prompt... timed out collect_linuxbios_info: Searching for L boot: hda1:/vmlinuz-2.4.20-8 root=/dev/hda2 console=tty0 console=ttyS0,115200nd_lb_table: Found canidate at: 00000500 collect_linuxbios_info: Found LinuxBIOS tabl find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 convert_memmap: 0x000000000000 ide_software_reset: Waiting for ide0 to become ready for reset... ok convert_memmap: 0x00000000000de0 0x0000000009f220 1 init_drive: Testing for hda convert_memmap init_drive: Probing for hda0030000 1 init_drive: LBA mode, sectors=12672450rt_memmap: 0x000000000f0000 0x00000000 init_drive: Init device params... ok init_drive: Probing for hdb print_status: IDE: status=0x0, err=0x0 Mounted ext2fs Found Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) #1 Thu Mar 1 3 17:18:24 EST 2003 bzImage. Loading kernel... ok Jumping to entry point... Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000de0 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) 0MB HIGHMEM available. 512MB LOWMEM available. hm, page 00000000 reserved twice. On node 0 totalpages: 131072 zone(0): 4096 pages. zone(1): 126976 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda2 console=tty0 console=ttyS0,115200 Initializing CPU#0 Detected 1995.061 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop...
1. use latest kernel. 2. problem could be still with LinuxBIOS stage.
YH
On 7/26/05, Huang-Jen Wang huangjen.wang@gmail.com wrote:
Dear all, My linuxbios tried to boot the linux...but has a problem..hope you can give me some advice...thanks....the message is follow: ..... ollect_sys_info: 00000000000c0000-00000 pci_init: 01:02.0 1166:0130 0604 00 pci_init: 01:03.0 1166:0132 0604 00nt addr 0x1258e0 size 0x48 offset 0 pci_init: 01:04.0 1166:0132 0604 00 pci_init: 01:05.0 1166:0132 0604 00n PT_LOAD segment pci_init: 01:06.0 1166:0132 0604 000000000000100000 memsz: 0x000000000 pci_init: 01:07.0 1166:0036 0604 00 pci_init: 01:09.0 1166:0223 0c03 10 pci_init: 01:09.1 1166:0223 0c03 10 00000000000048 pci_init: 01:09.2 1166:0223 0c03 20 FILO pci_init: 02:06.0 1000:0030 0100 00domain) Fri Jul 22 19:47:38 CST 200 pci_init: 03:04.0 14e4:1668 0200 00 pci_init: 03:04.1 14e4:1668 0200 000xe1fb007 pci_init: 08:0d.0 1166:0104 0604 00ebx = 0x1ffe9420 Press <Enter> for default boot, or <Esc> for boot prompt... timed out collect_linuxbios_info: Searching for L boot: hda1:/vmlinuz-2.4.20-8 root=/dev/hda2 console=tty0 console=ttyS0,115200nd_lb_table: Found canidate at: 00000500 collect_linuxbios_info: Found LinuxBIOS tabl find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 convert_memmap: 0x000000000000 ide_software_reset: Waiting for ide0 to become ready for reset... ok convert_memmap: 0x00000000000de0 0x0000000009f220 1 init_drive: Testing for hda convert_memmap init_drive: Probing for hda0030000 1 init_drive: LBA mode, sectors=12672450rt_memmap: 0x000000000f0000 0x00000000 init_drive: Init device params... ok init_drive: Probing for hdb print_status: IDE: status=0x0, err=0x0 Mounted ext2fs Found Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) #1 Thu Mar 1 3 17:18:24 EST 2003 bzImage. Loading kernel... ok Jumping to entry point... Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000de0 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) 0MB HIGHMEM available. 512MB LOWMEM available. hm, page 00000000 reserved twice. On node 0 totalpages: 131072 zone(0): 4096 pages. zone(1): 126976 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda2 console=tty0 console=ttyS0,115200 Initializing CPU#0 Detected 1995.061 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop...
LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios
On Wed, 27 Jul 2005, Huang-Jen Wang wrote:
Calibrating delay loop...
A hang right here means you are not getting clock interrupts.
ron
-
Huang-Jen Wang -
Ronald G. Minnich -
yhlu