Author: uwe Date: 2007-10-18 01:43:59 +0200 (Thu, 18 Oct 2007) New Revision: 2872
Modified: trunk/util/superiotool/README trunk/util/superiotool/ali.c trunk/util/superiotool/fintek.c trunk/util/superiotool/ite.c trunk/util/superiotool/nsc.c trunk/util/superiotool/smsc.c trunk/util/superiotool/superiotool.8 trunk/util/superiotool/superiotool.c trunk/util/superiotool/superiotool.h trunk/util/superiotool/winbond.c Log: Drop support for the --human-readable option. It's not any more useful than the --dump option, it just means lots of additional work for no gain, IMO.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: trunk/util/superiotool/README =================================================================== --- trunk/util/superiotool/README 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/README 2007-10-17 23:43:59 UTC (rev 2872) @@ -33,7 +33,6 @@ $ superiotool [-d] [-D] [-V] [-v] [-h]
-d | --dump Dump Super I/O registers - -D | --dump-readable Dump Super I/O registers in human-readable format -V | --verbose Verbose mode -v | --version Show the superiotool version -h | --help Show a short help text @@ -51,11 +50,7 @@
$ superiotool -d
- - Detailed register dump in human-readable format:
- $ superiotool -D - - Supported Super I/O Chips -------------------------
Modified: trunk/util/superiotool/ali.c =================================================================== --- trunk/util/superiotool/ali.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/ali.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -92,7 +92,6 @@ chip_found = 1;
dump_superio("ALi", reg_table, port, id); - dump_superio_readable(port); /* TODO */
exit_conf_mode_ali(port); }
Modified: trunk/util/superiotool/fintek.c =================================================================== --- trunk/util/superiotool/fintek.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/fintek.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -70,68 +70,6 @@ {EOT} };
-static void dump_readable_fintek(uint16_t port, uint16_t did) -{ - if (!dump_readable) - return; - - printf("Human-readable register dump:\n"); - - printf("Flash write is %s.\n", - regval(port, 0x28) & 0x80 ? "enabled" : "disabled"); - printf("Flash control is 0x%04x.\n", regval(port, 0x28)); - printf("27=%02x\n", regval(port, 0x27)); - printf("29=%02x\n", regval(port, 0x29)); - printf("2a=%02x\n", regval(port, 0x2a)); - printf("2b=%02x\n", regval(port, 0x2b)); - - /* Select UART 1. */ - regwrite(port, 0x07, 0x01); - printf("UART1 is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("UART1 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f, - regval(port, 0xf0) & 0x10 ? "RS485" : "RS232"); - - /* Select UART 2. */ - regwrite(port, 0x07, 0x02); - printf("UART2 is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("UART2 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f, - regval(port, 0xf0) & 0x10 ? "RS485" : "RS232"); - - /* Select parallel port. */ - regwrite(port, 0x07, 0x03); - printf("PARPORT is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("PARPORT base=%02x%02x, irq=%02x\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f); - - /* Select HW monitor. */ - regwrite(port, 0x07, 0x04); - printf("HW monitor is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("HW monitor base=%02x%02x, irq=%02x\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f); - - /* Select GPIO. */ - regwrite(port, 0x07, 0x05); - printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf - ("GPIO 70=%02x, e0=%02x, e1=%02x, e2=%02x, e3=%02x, e4=%02x, e5=%02x\n", - regval(port, 0x70), regval(port, 0xe0), regval(port, 0xe1), - regval(port, 0xe2), regval(port, 0xe3), regval(port, 0xe4), - regval(port, 0xe5)); - printf - ("GPIO e6=%02x, e7=%02x, e8=%02x, e9=%02x, f0=%02x, f1=%02x, f3=%02x, f4=%02x\n", - regval(port, 0xe6), regval(port, 0xe7), regval(port, 0xe8), - regval(port, 0xe9), regval(port, 0xf0), regval(port, 0xf1), - regval(port, 0xf3), regval(port, 0xf4)); - printf("GPIO f5=%02x, f6=%02x, f7=%02x, f8=%02x\n", regval(port, 0xf5), - regval(port, 0xf6), regval(port, 0xf7), regval(port, 0xf8)); -} - void probe_idregs_fintek(uint16_t port) { uint16_t vid, did; @@ -158,7 +96,6 @@ chip_found = 1;
dump_superio("Fintek", reg_table, port, did); - dump_readable_fintek(port, did);
exit_conf_mode_winbond_fintek_ite_8787(port); }
Modified: trunk/util/superiotool/ite.c =================================================================== --- trunk/util/superiotool/ite.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/ite.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -369,7 +369,6 @@ chip_found = 1;
dump_superio("ITE", reg_table, port, id); - dump_superio_readable(port); /* TODO */ }
void probe_idregs_ite(uint16_t port)
Modified: trunk/util/superiotool/nsc.c =================================================================== --- trunk/util/superiotool/nsc.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/nsc.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -135,42 +135,6 @@ {EOT} };
-static void dump_readable_pc8374l(uint16_t port) -{ - if (!dump_readable) - return; - - printf("Human-readable register dump:\n"); - - printf("Enables: 21=%02x, 22=%02x, 23=%02x, 24=%02x, 26=%02x\n", - regval(port, 0x21), regval(port, 0x22), regval(port, 0x23), - regval(port, 0x24), regval(port, 0x26)); - printf("SMBUS at %02x\n", regval(port, 0x2a)); - - /* Check COM1. This is all we care about at present. */ - printf("COM 1 is globally %s\n", - regval(port, 0x26) & 8 ? "disabled" : "enabled"); - - /* Select COM1. */ - regwrite(port, 0x07, 0x03); - printf("COM 1 is locally %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf - ("COM1 60=%02x, 61=%02x, 70=%02x, 71=%02x, 74=%02x, 75=%02x, f0=%02x\n", - regval(port, 0x60), regval(port, 0x61), regval(port, 0x70), - regval(port, 0x71), regval(port, 0x74), regval(port, 0x75), - regval(port, 0xf0)); - - /* Select GPIO. */ - regwrite(port, 0x07, 0x07); - printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf - ("GPIO 60=%02x, 61=%02x, 70=%02x, 71=%02x, 74=%02x, 75=%02x, f0=%02x\n", - regval(port, 0x60), regval(port, 0x61), regval(port, 0x70), - regval(port, 0x71), regval(port, 0x74), regval(port, 0x75), - regval(port, 0xf0)); -} - void probe_idregs_nsc(uint16_t port) { uint8_t id, rev; @@ -205,7 +169,5 @@ chip_found = 1;
dump_superio("NSC", reg_table, port, id); - if (id == 0xf1) - dump_readable_pc8374l(port); }
Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/smsc.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -381,7 +381,6 @@ chip_found = 1;
dump_superio((id == 0x77 ? "ASUS" : "SMSC"), reg_table, port, id); - dump_superio_readable(port); /* TODO */
exit_conf_mode_smsc(port); }
Modified: trunk/util/superiotool/superiotool.8 =================================================================== --- trunk/util/superiotool/superiotool.8 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/superiotool.8 2007-10-17 23:43:59 UTC (rev 2872) @@ -2,7 +2,7 @@ .SH NAME superiotool - Super I/O detection tool .SH SYNOPSIS -.B superiotool \fR[\fB-dDVvh\fR] +.B superiotool \fR[\fB-dVvh\fR] .SH DESCRIPTION .B superiotool is a GPL'd user-space utility which can @@ -72,17 +72,6 @@ detailed information about the .BR MM " fields." .TP -.B "-D, --dump-readable" -Dump Super I/O registers in human-readable format (if the Super I/O chip -is detected and -.B superiotool -supports the -.B "--dump-readable" -option for this chip). -.sp -The output format of this option is different for every Super I/O, and only -very few Super I/Os currently support this option. -.TP .B "-V, --verbose" Enable verbose mode. This option can be used together with the .BR "-d" " or " "-D" " option (or both)."
Modified: trunk/util/superiotool/superiotool.c =================================================================== --- trunk/util/superiotool/superiotool.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/superiotool.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -23,7 +23,7 @@ #include "superiotool.h"
/* Command line options. */ -int dump = 0, dump_readable = 0, verbose = 0; +int dump = 0, verbose = 0;
/* Global flag which indicates whether a chip was detected at all. */ int chip_found = 0; @@ -151,13 +151,6 @@ } }
-void dump_superio_readable(uint16_t port) -{ - /* TODO */ - if (dump_readable) - printf("No human-readable dump available for this Super I/O\n"); -} - void probing_for(const char *vendor, const char *info, uint16_t port) { if (!verbose) @@ -179,22 +172,18 @@
const static struct option long_options[] = { {"dump", no_argument, NULL, 'd'}, - {"dump-readable", no_argument, NULL, 'D'}, {"verbose", no_argument, NULL, 'V'}, {"version", no_argument, NULL, 'v'}, {"help", no_argument, NULL, 'h'}, {0, 0, 0, 0} };
- while ((opt = getopt_long(argc, argv, "dDVvh", + while ((opt = getopt_long(argc, argv, "dVvh", long_options, &option_index)) != EOF) { switch (opt) { case 'd': dump = 1; break; - case 'D': - dump_readable = 1; - break; case 'V': verbose = 1; break;
Modified: trunk/util/superiotool/superiotool.h =================================================================== --- trunk/util/superiotool/superiotool.h 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/superiotool.h 2007-10-17 23:43:59 UTC (rev 2872) @@ -29,9 +29,8 @@ #include <getopt.h> #include <sys/io.h>
-#define USAGE "Usage: superiotool [-d] [-D] [-V] [-v] [-h]\n\n\ +#define USAGE "Usage: superiotool [-d] [-V] [-v] [-h]\n\n\ -d | --dump Dump Super I/O registers\n\ - -D | --dump-readable Dump Super I/O registers in human-readable format\n\ -V | --verbose Verbose mode\n\ -v | --version Show the superiotool version\n\ -h | --help Show a short help text\n\n\ @@ -55,7 +54,7 @@ #define MAXNUMPORTS (6 + 1) /* Maximum number of Super I/O ports */
/* Command line parameters. */ -extern int dump, dump_readable, verbose; +extern int dump, verbose;
extern int chip_found;
@@ -80,7 +79,6 @@ uint16_t id); void dump_superio(const char *name, const struct superio_registers reg_table[], uint16_t port, uint16_t id); -void dump_superio_readable(uint16_t port); void probing_for(const char *vendor, const char *info, uint16_t port);
/* ali.c */
Modified: trunk/util/superiotool/winbond.c =================================================================== --- trunk/util/superiotool/winbond.c 2007-10-17 23:42:02 UTC (rev 2871) +++ trunk/util/superiotool/winbond.c 2007-10-17 23:43:59 UTC (rev 2872) @@ -428,7 +428,6 @@
/* TODO: Special notes in dump output for the MISC entries. */ dump_superio("Winbond", reg_table, port, id); - dump_superio_readable(port); /* TODO */ }
void probe_idregs_winbond(uint16_t port)
-
svn＠openbios.org