I have included below the output from the console when attempting to boot linuxbios, it always seems to just hang at this point... any pointers... I am on an EPIA-M10000 board.
Thanks,
James.
LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1106/3123] PCI: 00:01.0 [1106/b091] PCI: 00:0d.0 [1106/3044] PCI: 00:10.0 [1106/3038] PCI: 00:10.1 [1106/3038] PCI: 00:10.2 [1106/3038] PCI: 00:10.3 [1106/3104] PCI: 00:11.0 [1106/3177] PCI: 00:11.1 [1106/0571] PCI: 00:11.5 [1106/3059] PCI: 00:12.0 [1106/3065] PCI: pci_scan_bus for bus 1 PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem PCI: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem PCI: 00:0d.0 14 <- [0x00001800 - 0x0000187f] io PCI: 00:10.0 20 <- [0x00001880 - 0x0000189f] io PCI: 00:10.1 20 <- [0x000018a0 - 0x000018bf] io PCI: 00:10.2 20 <- [0x000018c0 - 0x000018df] io PCI: 00:10.3 10 <- [0xfeb01000 - 0xfeb010ff] mem PCI: 00:11.1 20 <- [0x000018e0 - 0x000018ef] io PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io PCI: 00:12.0 10 <- [0x00001400 - 0x000014ff] io PCI: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem ASSIGNED RESOURCES, bus 0 done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 cmd <- 07 PCI: 00:0d.0 cmd <- 83 PCI: 00:10.0 cmd <- 01 PCI: 00:10.1 cmd <- 01 PCI: 00:10.2 cmd <- 01 PCI: 00:10.3 cmd <- 02 PCI: 00:11.0 cmd <- 87 PCI: 00:11.1 cmd <- 07 PCI: 00:11.5 cmd <- 01 PCI: 00:12.0 cmd <- 83 done. Initializing PCI devices... PCI devices initialized totalram: 127M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC
Hi James,
What kind of memory are you using?
-Andrew
On Sun, Aug 10, 2003 at 05:14:10PM +0100, James Weir wrote:
I have included below the output from the console when attempting to boot linuxbios, it always seems to just hang at this point... any pointers... I am on an EPIA-M10000 board.
Thanks,
James.
LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1106/3123] PCI: 00:01.0 [1106/b091] PCI: 00:0d.0 [1106/3044] PCI: 00:10.0 [1106/3038] PCI: 00:10.1 [1106/3038] PCI: 00:10.2 [1106/3038] PCI: 00:10.3 [1106/3104] PCI: 00:11.0 [1106/3177] PCI: 00:11.1 [1106/0571] PCI: 00:11.5 [1106/3059] PCI: 00:12.0 [1106/3065] PCI: pci_scan_bus for bus 1 PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem PCI: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem PCI: 00:0d.0 14 <- [0x00001800 - 0x0000187f] io PCI: 00:10.0 20 <- [0x00001880 - 0x0000189f] io PCI: 00:10.1 20 <- [0x000018a0 - 0x000018bf] io PCI: 00:10.2 20 <- [0x000018c0 - 0x000018df] io PCI: 00:10.3 10 <- [0xfeb01000 - 0xfeb010ff] mem PCI: 00:11.1 20 <- [0x000018e0 - 0x000018ef] io PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io PCI: 00:12.0 10 <- [0x00001400 - 0x000014ff] io PCI: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem ASSIGNED RESOURCES, bus 0 done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 cmd <- 07 PCI: 00:0d.0 cmd <- 83 PCI: 00:10.0 cmd <- 01 PCI: 00:10.1 cmd <- 01 PCI: 00:10.2 cmd <- 01 PCI: 00:10.3 cmd <- 02 PCI: 00:11.0 cmd <- 87 PCI: 00:11.1 cmd <- 07 PCI: 00:11.5 cmd <- 01 PCI: 00:12.0 cmd <- 83 done. Initializing PCI devices... PCI devices initialized totalram: 127M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
Andrew,
It is DDR 266 as I remember.... I will double check..
James.
-----Original Message----- From: Andrew Ip [mailto:aip@cwlinux.com] Sent: 10 August 2003 18:07 To: James Weir Cc: linuxbios@clustermatic.org Subject: Re: help can't get it working on epia-m10000
Hi James,
What kind of memory are you using?
-Andrew
On Sun, Aug 10, 2003 at 05:14:10PM +0100, James Weir wrote:
I have included below the output from the console when attempting to boot linuxbios, it always seems to just hang at this point... any pointers... I am on an EPIA-M10000 board.
Thanks,
James.
LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1106/3123] PCI: 00:01.0 [1106/b091] PCI: 00:0d.0 [1106/3044] PCI: 00:10.0 [1106/3038] PCI: 00:10.1 [1106/3038] PCI: 00:10.2 [1106/3038] PCI: 00:10.3 [1106/3104] PCI: 00:11.0 [1106/3177] PCI: 00:11.1 [1106/0571] PCI: 00:11.5 [1106/3059] PCI: 00:12.0 [1106/3065] PCI: pci_scan_bus for bus 1 PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem PCI: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem PCI: 00:0d.0 14 <- [0x00001800 - 0x0000187f] io PCI: 00:10.0 20 <- [0x00001880 - 0x0000189f] io PCI: 00:10.1 20 <- [0x000018a0 - 0x000018bf] io PCI: 00:10.2 20 <- [0x000018c0 - 0x000018df] io PCI: 00:10.3 10 <- [0xfeb01000 - 0xfeb010ff] mem PCI: 00:11.1 20 <- [0x000018e0 - 0x000018ef] io PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io PCI: 00:12.0 10 <- [0x00001400 - 0x000014ff] io PCI: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem ASSIGNED RESOURCES, bus 0 done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 cmd <- 07 PCI: 00:0d.0 cmd <- 83 PCI: 00:10.0 cmd <- 01 PCI: 00:10.1 cmd <- 01 PCI: 00:10.2 cmd <- 01 PCI: 00:10.3 cmd <- 02 PCI: 00:11.0 cmd <- 87 PCI: 00:11.1 cmd <- 07 PCI: 00:11.5 cmd <- 01 PCI: 00:12.0 cmd <- 83 done. Initializing PCI devices... PCI devices initialized totalram: 127M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
* James Weir linuxbios@smashed.demon.co.uk [030810 18:14]:
I have included below the output from the console when attempting to boot linuxbios, it always seems to just hang at this point... any pointers... I am on an EPIA-M10000 board.
Initializing PCI devices... PCI devices initialized totalram: 127M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC
I'm having the very same problem. You could try a different DDR Ram module. The Epia-M Port does not do a complete SPD-based setup of the ram controller yet
Stefan
-
Andrew Ip -
James Weir -
Stefan Reinauer