Hi, guys,
I've just started playing with LinuxBIOS on the IWill DK8-HTX with a PathScale InfiniPath HTX card in the HTX slot. Long story short: boots with HTX card unplugged, hangs early in boot with it plugged in. Same for both r2520 (head today) and r2481. The latter is the supposedly known-working here: http://linuxbios.eu/DK8HTX_Build_Tutorial
Same behavior on multiple machines, one of which has been in realiable service with LB sans HTX card for a few days, so I suspect it's not a problem of hardware flakiness.
Before I dive in and try to track it down (perhaps on Wednesday), does anybody know of something obvious I need to do/hardcode/whatever to use the HTX slot?
Thanks for any insight you may have!
-mcq
---
With the InfiniPath HTX card installed, hangs very early:
[---POWER APPLIED---] LinuxBIOS-2.0.0_dk8_htx_Fallback Mon Dec 11 14:49:16 MST 2006 starting... *sysinfo range: [000cf000,000cf2c0) bsp_apicid=00 (0,1) link=01 (1,0) link=01 02 nodes initialized. core0 started: 01 started ap apicid: SBLink=02 NC node|link=00 busn=40 NC node|link=02 ht reset - [---PAUSE ca. 5 SECONDS---]
LinuxBIOS-2.0.0_dk8_htx_Fallback Mon Dec 11 14:49:16 MST 2006 starting... *sysinfo range: [000cf000,000cf2c0) bsp_apicid=00 (0,1) link=01 (1,0) link=01 02 nodes initialized. core0 started: 01 started ap apicid: SBLink=02 NC node|link=00 busn=40 NC node|link=02 [---PERMANENT HANG---]
With the InfiniPath HTX card removed:
[---POWER APPLIED---] LinuxBIOS-2.0.0_dk8_htx_Fallback Mon Dec 11 14:49:16 MST 2006 starting... *sysinfo range: [000cf000,000cf2c0) bsp_apicid=00 (0,1) link=01 (1,0) link=01 02 nodes initialized. core0 started: 01 started ap apicid: SBLink=02 NC node|link=02 ht reset -
LinuxBIOS-2.0.0_dk8_htx_Fallback Mon Dec 11 14:49:16 MST 2006 starting... *sysinfo range: [000cf000,000cf2c0) bsp_apicid=00 (0,1) link=01 (1,0) link=01 02 nodes initialized. core0 started: 01 started ap apicid: SBLink=02 NC node|link=02 Ram1.00 Ram1.01 Ram2.00 Ram2.01 Ram3 Initializing memory: done Initializing memory: done Ram4 v_esp=000cefe8 testx = 5a5a5a5a Copying data from cache to ram -- switching to use ram as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to ram. src=fffdf000 ... [---NORMAL SUCCESSFUL BOOT CONTINUES---]
[tweek.mcq] gcc-3.3 -v Reading specs from /usr/lib/gcc-lib/i486-linux-gnu/3.3.6/specs Configured with: ../src/configure -v --enable-languages=c,c++ --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared --enable-__cxa_atexit --with-system-zlib --enable-nls --without-included-gettext --enable-clocale=gnu --enable-debug i486-linux-gnu Thread model: posix gcc version 3.3.6 (Debian 1:3.3.6-13)
-
mcqmcqmcq＠fastmail.fm