Howdy folks, I have been trying to build the tyan s2895 board with gcc 3.3 on SuSE 10.0 It doesn't build. The loader tries to overlap some sections. I got around this by laying out my own ldscript.lb file (similarly to what Ron wants to do). After this, both the fallback and normal builds result in the following error:
nm -n linuxbios_ram | sort > linuxbios_ram.map objcopy --gap-fill 0xff -O binary linuxbios_ram linuxbios_ram.bin ./nrv2b e linuxbios_ram.bin linuxbios_ram.nrv2b input/output = 164944/55295 = 2.983 cp linuxbios_ram.nrv2b linuxbios_ram.rom gcc -m32 -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o init.o nm -n linuxbios | sort > linuxbios.map objcopy --gap-fill 0xff -O binary linuxbios linuxbios.strip ./buildrom linuxbios.strip linuxbios.rom ../../../../payloads/forcedeth--filo_hda2_vga.zelf 0x20000 0x40000 ../../../../payloads/forcedeth--filo_hda2_vga.zelf: No such file or directory
What does this mean? Also, is there a writeup on just what buildrom does?
Thanks, Jeff Young
PS: Can anyone actually build the S2895 without any errors today? If so, exactly how do you do it. (Note that I have tried several snapshots from 2007 -> 2163 without success.)
-
Young, Jeff S.