EPIA-M 10000 etherboot

hello~

i have been testing linuxbios with epia-m10000 and rom emulator.
i made the romimage from /freebios/src/mainboard/via/epia-m/example.config.
when loaded it to rom emulator and reset, hyperterminal said "x-x-f"
but when loaded it and reset after loading original epia-m 10000 bios and reset, etherboot worked successfully.

following is the config file
#
# linuxbios config file for: via epia-m mini-itx
#
target /opt/cwlinux/buildrom/epia-m
# via epia
mainboard via/epia-m
# enable serial console for debugging
option serial_console=1
# option serial_post=1
option ttys0_baud=115200
# option ttys0_baud=57600
option default_console_loglevel=9
option debug=1
# use 256kb standard flash as normal bios 
option ramtest=1
option use_generic_rom=1
option std_flash=1
#option zkernel_start=0xfffc0000
option rom_size=262144
# payload size = 192kb
option payload_size=196608
# use elf loader to load etherboot
option use_elf_boot=1
# use etherboot as our payload 
payload /opt/cwlinux/etherboot/src/bin32/via-rhine.ebi
# payload /opt/cwlinux/memtest86/memtest

plz, give me some hints~ :-)

DDR보다 신난다! 온라인으로 즐기는 3D아바타 댄싱 게임
http://showtime2.freechal.com/index.asp

EPIA-M 10000 etherboot [PMX:##]

[ron minnich]

add this line:

option MAXIMUM_CONSOLE_LOGLEVEL=9

not very intuitive, but might help.

Do you have a POST card?

ron

[Andrew Ip]

> i have been testing linuxbios with epia-m10000 and rom emulator.
> i made the romimage from /freebios/src/mainboard/via/epia-m/example.config.
> when loaded it to rom emulator and reset, hyperterminal said "x-x-f"
> but when loaded it and reset after loading original epia-m 10000 bios and reset, etherboot worked successfully.

You may want to use 57600 instead.  It is a magic from Award which I haven't
figured out yet.

-Andrew
> following is the config file
> #
> # linuxbios config file for: via epia-m mini-itx
> #
> target /opt/cwlinux/buildrom/epia-m
> # via epia
> mainboard via/epia-m
> # enable serial console for debugging
> option serial_console=1
> # option serial_post=1
> option ttys0_baud=115200
> # option ttys0_baud=57600
> option default_console_loglevel=9
> option debug=1
> # use 256kb standard flash as normal bios 
> option ramtest=1
> option use_generic_rom=1
> option std_flash=1
> #option zkernel_start=0xfffc0000
> option rom_size=262144
> # payload size = 192kb
> option payload_size=196608
> # use elf loader to load etherboot
> option use_elf_boot=1
> # use etherboot as our payload 
> payload /opt/cwlinux/etherboot/src/bin32/via-rhine.ebi
> # payload /opt/cwlinux/memtest86/memtest
>
> plz, give me some hints~ :-)
>
> DDRº¸´Ù ½Å³­´Ù! ¿Â¶óÀÎÀ¸·Î Áñ±â´Â 3D¾Æ¹ÙŸ ´í½Ì °ÔÀÓ
> http://showtime2.freechal.com/index.asp