flashrom: Gigabyte GA-EP35-DS3L test report

[Alexander Gordeev]

Hi all!

I've tested Gigabyte GA-EP35-DS3L board 
(http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Produ...)
and it is supported by flashrom out of the box:

flashrom v0.9.0+r544
No coreboot table found.
Found chipset "Intel ICH9", enabling flash write... OK.
Calibrating delay loop... OK.
Found chip "Macronix MX25L8005" (1024 KB) at physical address 0xfff00000.
No operations were specified.

I've tested all the operations and rebooted to a new BIOS and everything is ok 
so far.

I'll be happy to provide any additional information so please feel free to 
ask!

[Uwe Hermann]

On Sat, Jun 06, 2009 at 01:16:43AM +0400, Alexander Gordeev wrote:
> I've tested Gigabyte GA-EP35-DS3L board 
> (http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Produ...)
> and it is supported by flashrom out of the box:

Thanks, we'll add that as supported.

Just to make sure: after writing the new image, a 'flashrom -v foo.bin'
worked fine and sayd VERIFIED? I assume yes, as the new BIOS booted
fine (?)

Uwe.

[Alexander Gordeev]

On Tue, 23 Jun 2009 15:49:17 +0200
Uwe Hermann  wrote:
> On Sat, Jun 06, 2009 at 01:16:43AM +0400, Alexander Gordeev wrote:
> > I've tested Gigabyte GA-EP35-DS3L board 
> > (http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Produ...)
> > and it is supported by flashrom out of the box:
>
> Thanks, we'll add that as supported.

Great!
> Just to make sure: after writing the new image, a 'flashrom -v
> foo.bin' worked fine and sayd VERIFIED? I assume yes, as the new BIOS
> booted fine (?)

Yes, indeed, I verified it after writing.