Question on switching memory stick from dimm_mask 0x01 to dimm_mask 0x10

[Fengwei Zhang]

Hi all,

For some reason, I need to switch my memory stick from dimm_mask 0x01 to 
dimm_mask 0x10 on board asus m2v_mx_se.

I am using a 2G kingston DDR2 memory on board m2v_mx-se. If I put the 
memory stick on board with dimm_mask 0x01. It could successfully boot 
with coreboot.
But If I put the memory stick on board with dimm_mask 0x10. Booting 
process would stop at pci_scan_bus() function after print out 
post_code(0x24) on the serial port.

I also tried manufacture BIOS, it could successfully boot for both 
dimm_mask 0x01 and 0x10.

Does anyone has this problem before? Is there anyway to fix this?

I would appreciate your precious comments!

Best,
Fengwei