Fwd: Question on switching memory stick from dimm_mask 0x01 to dimm_mask 0x10

[Fengwei Zhang]

I just want to add the serial port log file. It may help me to explain 
the problem more clear.

Best,
Fengwei

-------- Original Message --------
Subject: Question on switching memory stick from dimm_mask 0x01 to 
dimm_mask 0x10
Date: Fri, 10 Dec 2010 15:35:11 -0500
From: Fengwei Zhang 
To: [e-mail]

Hi all,

For some reason, I need to switch my memory stick from dimm_mask 0x01 to
dimm_mask 0x10 on board asus m2v_mx_se.

I am using a 2G kingston DDR2 memory on board m2v_mx-se. If I put the
memory stick on board with dimm_mask 0x01. It could successfully boot
with coreboot.
But If I put the memory stick on board with dimm_mask 0x10. Booting
process would stop at pci_scan_bus() function after print out
post_code(0x24) on the serial port.

I also tried manufacture BIOS, it could successfully boot for both
dimm_mask 0x01 and 0x10.

Does anyone has this problem before? Is there anyway to fix this?

I would appreciate your precious comments!

Best,
Fengwei