Author: stepan Date: 2009-03-11 16:20:36 +0100 (Wed, 11 Mar 2009) New Revision: 3993
Modified: trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/acpi_tables.c trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/auto.c trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/fadt.c trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/mptable.c Log: Kontron 986LCD-M updates: * ACPI updates: MCFG, HPET, FADT * some mptable fixes for certain riser cards * Use Channel XOR randomization * Fix SuperIO HWM setup * Enable all three network adapters
Signed-off-by: Stefan Reinauer stepan@coresystems.de Acked-by: Myles Watson mylesgw@gmail.com
Modified: trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/acpi_tables.c =================================================================== --- trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/acpi_tables.c 2009-03-11 15:00:50 UTC (rev 3992) +++ trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/acpi_tables.c 2009-03-11 15:20:36 UTC (rev 3993) @@ -96,30 +96,50 @@
unsigned long acpi_fill_mcfg(unsigned long current) { -#if 0 device_t dev; - u64 mmcfg; + u32 pciexbar = 0; + u32 pciexbar_reg; + int max_buses;
- dev = dev_find_device(0x1106, 0x324b, 0); // 0:0x13.0 + dev = dev_find_device(0x8086, 0x27a0, 0); if (!dev) return current;
// MMCFG not supported or not enabled. - if ((pci_read_config8(dev, 0x40) & 0xC0) != 0xC0) + pciexbar_reg=pci_read_config32(dev, 0x48); + + if (!(pciexbar_reg & (1 << 0))) return current;
- mmcfg = ((u64) pci_read_config8(dev, 0x41)) << 28; - if (!mmcfg) + switch ((pciexbar_reg >> 1) & 3) { + case 0: // 256MB + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)); + max_buses = 256; + break; + case 1: // 128M + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + max_buses = 128; + break; + case 2: // 64M + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)); + max_buses = 64; + break; + default: // RSVD return current; + }
- current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, mmcfg, 0x0, 0x0, 0xff); -#endif + if (!pciexbar) + return current; + + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, + pciexbar, 0x0, 0x0, max_buses - 1); + return current; }
void acpi_create_intel_hpet(acpi_hpet_t * hpet) { -#define HPET_ADDR 0xfe800000ULL +#define HPET_ADDR 0xfed00000ULL acpi_header_t *header = &(hpet->header); acpi_addr_t *addr = &(hpet->addr);
@@ -135,16 +155,15 @@ header->revision = 1;
/* fill out HPET address */ - // XXX factory bios just puts an address here -- who's right? addr->space_id = 0; /* Memory */ addr->bit_width = 64; addr->bit_offset = 0; addr->addrl = HPET_ADDR & 0xffffffff; addr->addrh = HPET_ADDR >> 32;
- hpet->id = 0x80861234; /* VIA */ + hpet->id = 0x8086a201; /* Intel */ hpet->number = 0x00; - hpet->min_tick = 0x0090; + hpet->min_tick = 0x0080;
header->checksum = acpi_checksum((void *) hpet, sizeof(acpi_hpet_t)); @@ -199,10 +218,11 @@ acpi_oemb_t *oemb; acpi_header_t *dsdt;
- /* Align ACPI tables to 16byte */ - start = (start + 0x0f) & -0x10; current = start;
+ /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
/* We need at least an RSDP and an RSDT Table */ @@ -222,7 +242,6 @@ /* * We explicitly add these tables later on: */ -#if 0 printk_debug("ACPI: * HPET\n");
hpet = (acpi_hpet_t *) current; @@ -230,7 +249,7 @@ ALIGN_CURRENT; acpi_create_intel_hpet(hpet); acpi_add_table(rsdt, hpet); -#endif + /* If we want to use HPET Timers Linux wants an MADT */ printk_debug("ACPI: * MADT\n");
@@ -239,14 +258,13 @@ current += madt->header.length; ALIGN_CURRENT; acpi_add_table(rsdt, madt); -#if 0 + printk_debug("ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; ALIGN_CURRENT; acpi_add_table(rsdt, mcfg); -#endif
printk_debug("ACPI: * OEMB\n"); oemb=(acpi_oemb_t *)current; @@ -278,10 +296,10 @@
/* We patched up the DSDT, so we need to recalculate the checksum */ dsdt->checksum = 0; - dsdt->checksum = acpi_checksum(dsdt, dsdt->length); + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); #endif
- printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, + printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length);
printk_debug("ACPI: * FADT\n"); @@ -291,7 +309,7 @@
acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdt, fadt); - printk_debug("current = %x\n", current); + printk_debug("current = %lx\n", current);
printk_debug("ACPI: * DMI (Linux workaround)\n"); memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE);
Modified: trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/auto.c =================================================================== --- trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/auto.c 2009-03-11 15:00:50 UTC (rev 3992) +++ trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/auto.c 2009-03-11 15:20:36 UTC (rev 3993) @@ -64,7 +64,7 @@ outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ /* Input Control Registers */ outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000000ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x000100ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ outl(0x00010035, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ } @@ -85,6 +85,8 @@ * #define will do. */ #define OVERRIDE_CLOCK_DISABLE 1 + +#define CHANNEL_XOR_RANDOMIZATION 1 #include "northbridge/intel/i945/raminit.h" #include "northbridge/intel/i945/raminit.c" #include "northbridge/intel/i945/reset_test.c" @@ -100,7 +102,7 @@ // Enable COM1/COM2/KBD/SuperIO1+2 pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b); // Enable HWM at 0xa00 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x0a01); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01); // COM3 decode pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000403e9); // COM4 decode @@ -236,7 +238,8 @@ RCBA32(0x3400) = (1 << 2);
/* Disable unused devices */ - RCBA32(0x3418) = 0x000e0063; + RCBA32(0x3418) = FD_PCIE6|FD_PCIE5|FD_PCIE4|FD_ACMOD|FD_ACAUD|FD_PATA; + RCBA32(0x3418) |= (1 << 0); // Required.
/* Enable PCIe Root Port Clock Gate */ // RCBA32(0x341c) = 0x00000001;
Modified: trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/fadt.c =================================================================== --- trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/fadt.c 2009-03-11 15:00:50 UTC (rev 3992) +++ trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/fadt.c 2009-03-11 15:20:36 UTC (rev 3993) @@ -31,15 +31,16 @@ memset((void *) fadt, 0, sizeof(acpi_fadt_t)); memcpy(header->signature, "FACP", 4); header->length = 132; - header->revision = 1; + header->revision = 2; memcpy(header->oem_id, "CORE ", 6); memcpy(header->oem_table_id, "COREBOOT", 8); memcpy(header->asl_compiler_id, "CORE", 4); - header->asl_compiler_revision = 0; + header->asl_compiler_revision = 1;
fadt->firmware_ctrl = (unsigned long) facs; fadt->dsdt = (unsigned long) dsdt; - fadt->preferred_pm_profile = 0; + fadt->model = 1; + fadt->preferred_pm_profile = 2; fadt->sci_int = 0x9; fadt->smi_cmd = 0xb2; fadt->acpi_enable = 0xe1; @@ -58,7 +59,7 @@
fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; + fadt->pm2_cnt_len = 0; fadt->pm_tmr_len = 4; fadt->gpe0_blk_len = 8; fadt->gpe1_blk_len = 0; @@ -79,6 +80,7 @@ // all cpus support c1 // sleep button is generic // rtc wakeup/s4 not possible + // use platform timer header->checksum = acpi_checksum((void *) fadt, header->length);
Modified: trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/mptable.c =================================================================== --- trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/mptable.c 2009-03-11 15:00:50 UTC (rev 3992) +++ trunk/coreboot-v2/src/mainboard/kontron/986lcd-m/mptable.c 2009-03-11 15:20:36 UTC (rev 3993) @@ -100,6 +100,7 @@ /* Firewire 4:0.0 */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10);
+ /* Old riser card */ // riser slot top 5:8.0 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14); // riser slot middle 5:9.0 @@ -107,6 +108,11 @@ // riser slot bottom 5:a.0 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16);
+ /* New Riser Card */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x30, 0x2, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x34, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x38, 0x2, 0x16); + /* Onboard Ethernet */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10);
-
svn＠coreboot.org