Hi Zvika,
On 27.06.2018 05:04, Zvi Vered wrote:
How can I know what is the right flashrom programmer I should use ?
for your case, `internal` is correct.
The vendor's programmer works without any external hardware. When I tried: flashrom --programmer internal, I got:
flashrom v0.9.9-rc1-r1942 on Linux 4.13.0-36-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. WARNING: No chipset found. Flash detection will most likely fail.
It seems your version of flashrom lacks support for your chipset. It might have been added in the meantime, see [1] for a full list of cur- rently supported hardware and [2] for list of the latest release. Even if it's still unsupported, with some luck flashrom just lacks the PCI ID.
Nico
[1] https://flashrom.org/Supported_hardware [2] https://flashrom.org/Flashrom/1.0/Supported_Hardware
-
Nico Huber