答复: unreliably booting off a BCM5701.

[YhLu]

Stefan,

You may try to increase the heap size in config. I meet such problem in
S2882 and solved that by increasing heap size.

Regards

YH

-----邮件原件-----
发件人: Stefan Reinauer [mailto:[e-mail]] 
发送时间: 2004年3月22日 9:45
收件人: [e-mail]
主题: Re: unreliably booting off a BCM5701.

* Stefan Reinauer  [040322 18:01]:
> Link is up at 1000 Mbps, full duplex. TX RX flow control
> ..Me: 192.168.0.2, Server: 192.168.0.1
> Loading 192.168.0.1:kernel.elf ...(ELF)... ...........  [..] ......done
> Firmware type: LinuxBIOS

Also, I could not get beyound this point with a Linux 2.6.5rc1 kernel.
Linux 2.4.x boots through to userland... It looks like a kernel issue,
but could it come from mkelfImage?

Stefan

unreliably booting off a BCM5701.

[Stefan Reinauer]

* YhLu  [040322 19:12]:
> Stefan,
>
> You may try to increase the heap size in config. I meet such problem in
> S2882 and solved that by increasing heap size.
>
> Regards
> YH

I've set stack size to 16k and heap size to 40k, according to what's
done on the s2885.. didn't work though.

Together with the Filo ide issues, it looks like something's wrong with
the pci devices?

Stefan