On Fri, Jun 19, 2009 at 12:06:51PM +0100, Harrison, Jon (SELEX GALILEO, UK) wrote:
Received and understood, then the basic issue is that at this point my coreboot build is still broken and will not boot, so there are no tables. (I had not realised the tables were read from RAM rather than the ROM image)
The upshot is that the flashrom ids are required to allow development from the original bios.... for the time being.
Once the build is booting properly and flashrom can autodetect I will remove the ids. In the mean time I'm hoping that having this early flashrom support will help others to help in the effort for the CN400/epia-n(l)/Luke.
If this is still all to immature for general release then fair enough, it can wait until things are working better.
Thanks, Jon
No, this is reasonable, i will add an extra comment and commit.
Plus, i think that we need to track down some badly filled out boards, pciid wise, so that we can change behaviour around the ids a bit. Make it a bit tighter: * require 2 main ids, always. * don't allow -m when a valid subsystem id is there.
But that's a discussion for some other time, and anyway, it has a rather tough prerequisite.
Luc Verhaegen.
No, this is reasonable, i will add an extra comment and commit.
Plus some whitespace/formatting changes, and a comment. -> r607.
Jon, could you please attach a full lspci -vnn of this board under non-coreboot circumstances for future reference?
Luc Verhaegen.
Thanks, lspci attached for reference.
Jon
-----Original Message----- From: Luc Verhaegen [mailto:libv@skynet.be] Sent: 19 June 2009 15:03 To: Harrison, Jon (SELEX GALILEO, UK) Cc: coreboot@coreboot.org Subject: Re: [coreboot] Flashrom support for EPIA-N(L) - patch for review
*** WARNING ***
This message has originated outside your organisation, either from an external partner or the Global Internet. Keep this in mind if you answer this message.
No, this is reasonable, i will add an extra comment and commit.
Plus some whitespace/formatting changes, and a comment. -> r607.
Jon, could you please attach a full lspci -vnn of this board under non-coreboot circumstances for future reference?
Luc Verhaegen.
SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************
-
Harrison, Jon (SELEX GALILEO, UK) -
Luc Verhaegen