[LinuxBIOS] r2663 - trunk/LinuxBIOSv2/src/drivers/i2c/adm1027

Author: uwe
Date: 2007-05-11 21:23:57 +0200 (Fri, 11 May 2007)
New Revision: 2663

Modified:
   trunk/LinuxBIOSv2/src/drivers/i2c/adm1027/adm1027.c
Log:
Clean up whitespace in preparation for another patch to fix fan control.

This is nothing more than the result of running

indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs adm1027.c

Signed-off-by: Ward Vandewege 
Signed-off-by: Uwe Hermann 
Acked-by: Ronald G. Minnich 
Acked-by: Uwe Hermann

Modified: trunk/LinuxBIOSv2/src/drivers/i2c/adm1027/adm1027.c
===================================================================
--- trunk/LinuxBIOSv2/src/drivers/i2c/adm1027/adm1027.c	2007-05-11 11:17:58 UTC (rev 2662)
+++ trunk/LinuxBIOSv2/src/drivers/i2c/adm1027/adm1027.c	2007-05-11 19:23:57 UTC (rev 2663)
@@ -8,58 +8,59 @@
 #include <cpu/x86/msr.h>
 #include "chip.h"

-#define ADM1027_REG_CONFIG1 0x40
-#define CFG1_STRT     	0x01
-#define CFG1_LOCK  	0x02
-#define CFG1_RDY	0x04
-#define CFG1_FSPD       0x08
-#define CFG1_VXI	0x10
-#define CFT1_FSPDIS     0x20
-#define CFG1_TODIS     	0x40
-#define CFG1_VCC	0x80
-#define ADM1027_REG_CONFIG2 0x73
-#define ADM1027_REG_CONFIG3 0x78
+#define ADM1027_REG_CONFIG1	0x40
+#define CFG1_STRT		0x01
+#define CFG1_LOCK		0x02
+#define CFG1_RDY		0x04
+#define CFG1_FSPD		0x08
+#define CFG1_VXI		0x10
+#define CFT1_FSPDIS		0x20
+#define CFG1_TODIS		0x40
+#define CFG1_VCC		0x80
+#define ADM1027_REG_CONFIG2	0x73
+#define ADM1027_REG_CONFIG3	0x78

static void adm1027_enable_monitoring(device_t dev)
-{        
-        int result;
-        result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
-       
-	if(!(result & CFG1_RDY) ) { 
+{
+	int result;
+
+	result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
+
+	if (!(result & CFG1_RDY)) {
    	printk_debug("ADM1027: monitoring not ready\r\n");
    	return;
    }
-        result = (result | CFG1_STRT);
-        result = smbus_write_byte(dev, ADM1027_REG_CONFIG1, result);
-        
-        result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
-        if (!(result & CFG1_STRT)) {
-                printk_debug("ADM1027: monitoring would not enable\r\n");
-        }
+	result = (result | CFG1_STRT);
+	result = smbus_write_byte(dev, ADM1027_REG_CONFIG1, result);
+
+	result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
+	if (!(result & CFG1_STRT)) {
+		printk_debug("ADM1027: monitoring would not enable\r\n");
+	}
    printk_debug("ADM1027: monitoring enabled\r\n");
 }

static void adm1027_init(device_t dev)
 {
-	if (dev->enabled && dev->path.type == DEVICE_PATH_I2C)
-	{
-		if(ops_smbus_bus(get_pbus_smbus(dev))) {
-			if( dev->bus->dev->path.type == DEVICE_PATH_I2C) smbus_set_link(dev); // it is under mux 
+	if (dev->enabled && dev->path.type == DEVICE_PATH_I2C) {
+		if (ops_smbus_bus(get_pbus_smbus(dev))) {
+			if (dev->bus->dev->path.type == DEVICE_PATH_I2C)
+				smbus_set_link(dev);	// it is under mux 
    		adm1027_enable_monitoring(dev);
    	}
-		
+
    }
+}

-}
 static void adm1027_noop(device_t dummy)
 {
 }

static struct device_operations adm1027_operations = {
-        .read_resources   = adm1027_noop,
-        .set_resources    = adm1027_noop,
-        .enable_resources = adm1027_noop,
-        .init             = adm1027_init,
+	.read_resources		= adm1027_noop,
+	.set_resources		= adm1027_noop,
+	.enable_resources	= adm1027_noop,
+	.init			= adm1027_init,
 };

static void enable_dev(struct device *dev)
@@ -69,5 +70,5 @@

struct chip_operations drivers_i2c_adm1027_ops = {
    CHIP_NAME("adm1027")
-	.enable_dev = enable_dev, 
+	.enable_dev = enable_dev,
 };