The LAR patch and the the patch before it gets me here: This is pbx (Linux i586 2.6.23-rc8-msm800sev-faro) 07:18:16 pbx login: root pbx ~ #
So this is a real boot, i.e. interactive.
There are still troubles.
pbx ~ # cat /proc/interrupts CPU0 0: 24051 XT-PIC-XT timer 2: 0 XT-PIC-XT cascade 4: 294 XT-PIC-XT serial 8: 0 XT-PIC-XT rtc 14: 13885 XT-PIC-XT ide0 NMI: 0 ERR: 1
no ethernet ...
pbx ~ # lspci 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31) 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03) 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01) 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02)
well ... pbx ~ # lspci -s 0:d.0 -v -v -v 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) Subsystem: VIA Technologies, Inc.: Unknown device 0106 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), cache line size 10 Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at febfd000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
So this is the old issue of interrupt routing. I am going to build a PIRQ table in next.
ron
-
ron minnich