Re: [coreboot] Via EPIA-N(L) C3/CN400 Support - Initial Patch for V2

[ron minnich]

Hi, I notice you have an ACPI blob in there. Where did that come from?

thanks

ron

Via EPIA-N(L) C3/CN400 Support - Initial Patch for V2

[Harrison, Jon (SELEX GALILEO, UK)]

Hi Ron,

It's lifted from the epia-m build... beyond that I'm not sure of its
provenance, so its not likely to work properly till I've got to the
point of integrating and debugging properly for the epia-n.

Ta,
Jon

-----Original Message-----
From: ron minnich [mailto:[e-mail]] 
Sent: 17 June 2009 22:11
To: Harrison, Jon (SELEX GALILEO, UK); coreboot
Subject: Re: [coreboot] Via EPIA-N(L) C3/CN400 Support - Initial Patch
for V2

*** WARNING ***

This message has originated outside your organisation,
  either from an external partner or the Global Internet. 
      Keep this in mind if you answer this message.

Hi, I notice you have an ACPI blob in there. Where did that come from?

thanks

ron

SELEX Sensors and Airborne Systems Limited
Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL
A company registered in England & Wales.  Company no. 02426132
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************