root@sparehdd:~/superiotool# ./superiotool -d Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e No dump available for this Super I/O
???
On jetway J7f2we1g, only board I have access to right now
On Sun, Sep 23, 2007 at 08:45:22AM -0400, Corey Osgood wrote:
root@sparehdd:~/superiotool# ./superiotool -d Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e No dump available for this Super I/O
???
That's expected, the -d functionality is not yet implemented for the Fintek Super I/Os. You can add it if you want, it's just a huge list of registers and their defaults as per datasheet.
Can you try -D, please? That _should_ work, but maybe I broke it.
Oh, and please reply to my original post when sending dumps, so we keep all of them together in one thread.
Thanks, Uwe.
Uwe Hermann wrote:
On Sun, Sep 23, 2007 at 08:45:22AM -0400, Corey Osgood wrote:
root@sparehdd:~/superiotool# ./superiotool -d Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e No dump available for this Super I/O
???
That's expected, the -d functionality is not yet implemented for the Fintek Super I/Os. You can add it if you want, it's just a huge list of registers and their defaults as per datasheet.
I'll look at it if I get some time (not likely soon)
Can you try -D, please? That _should_ work, but maybe I broke it.
Yep, that works:
root@sparehdd:~/superiotool# ./superiotool -D Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e Fintek F71805 Flash write is disabled. Flash control is 0x0008. 27=20 29=00 2a=ff 2b=ff UART1 is enabled UART1 base=03f8, irq=04, mode=RS232 UART2 is enabled UART2 base=02f8, irq=03, mode=RS232 PARPORT is enabled PARPORT base=0378, irq=07 HW monitor is enabled HW monitor base=0295, irq=00 GPIO is enabled GPIO 70=ff, e0=ff, e1=ff, e2=ff, e3=ff, e4=ff, e5=ff GPIO e6=ff, e7=ff, e8=ff, e9=ff, f0=ff, f1=ff, f3=ff, f4=ff GPIO f5=ff, f6=ff, f7=ff, f8=ff
-
Corey Osgood -
Uwe Hermann