New subject: Running with VGA

16 Dec 2004


      I try to build freebios2-20041216-0400
And I get this compilation error:
gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o
/usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux
-gnu/bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom
[fffd88c1 -> fffe0d7f]
/usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux
-gnu/bin/ld: section .id [fffdffd9 -> fffdffef] overlaps section .rom
[fffd88c1 -> fffe0d7f]
collect2: ld returned 1 exit status
make: *** [linuxbios] Error 1
What do you think it is?
Sagiv.
-----Original Message-----
From: YhLu [mailto:YhLu@tyan.com] 
Sent: Thursday, December 16, 2004 4:57 AM
To: Sagiv Yefet; linuxbios@clustermatic.org
Subject: RE: Running with VGA
I commit the changes for you. Please check it out from
http://snapshots.linuxbios.org/
one hour later.
YH
_____
From: Sagiv Yefet [mailto:sagivy@3vium.com] 
Sent: Wednesday, December 15, 2004 12:09 AM
To: YhLu; linuxbios@clustermatic.org
Subject: RE: Running with VGA
I have this definition in targets/tyan/s2850/Config.lb:
option CONFIG_CONSOLE_BTEXT=1
Not default as you wrote.
Is it ok?
Should I had the same thing in src/mainboard/tyan/s2850/Config.lb?
Sagiv.
-----Original Message-----
From: Yinghai Lu [mailto:yhlu@tyan.com] 
Sent: Monday, December 13, 2004 4:01 AM
To: Sagiv Yefet; linuxbios@clustermatic.org
Subject: RE: Running with VGA
You need to add
uses CONFIG_CONSOLE_BTEXT
default CONFIG_CONSOLE_BTEXT=1
dir /drivers/ati/ragexl
after that you can get ouput in Linuxbios after vga init.
You also need to enable the btext in Etherboot. You should use Etherboot
5.2.6. it includes filo and btext console.
About kernel, you need to use kernel patch to enable ragexl frame buffer
support.
YH
_____
From: linuxbios-admin@clustermatic.org
[mailto:linuxbios-admin@clustermatic.org] On Behalf Of Sagiv Yefet
Sent: Sunday, December 12, 2004 5:23 AM
To: linuxbios@clustermatic.org
Subject: Running with VGA
Hello, 
            I am using Linux Bios on Tyan 2850. The machine is running
with console.
            I add to the command line: "console=ttyS0,115200" and I have
linux which runs with console.
How can I run with VGA? Should I add some code to the bios?
The VGA driver is: ATI Rage XL.
Sagiv