Solo fails - once again..

[Stefan Reinauer]

Note, it says it's doing interleaving. Funny enough, it also interleaves
with one DIMM module.

Stefan

LinuxBIOS-1.1.5.0-Fallback Di Jan 13 17:12:12 CET 2004 starting...              
setting up resource map....                                                     
 AMD8111 southbridge is connected to HT link 00000000                           
setting up resource map....                                                     
done.                                                                           
Enabling routing table for node 00000000 done.                                  
Enabling UP settings                                                            
Disabling read/write/fill probes for UP... done.                                
coherent_ht_finalize                                                            
done                                                                            
SMBus controller enabled                                                        
Ram1.00                                                                         
setting up CPU00 northbridge registers                                          
done.                                                                           
Ram2.00                                                                         
133Mhz                                                                          
Interleaved                                                                     
RAM: 0x00080000 KB                                                              
Ram3                                                                            
Initializing memory:  done                                                      
Ram4                                                                            
Copying LinuxBIOS to ram.                                                       
Jumping to LinuxBIOS.

Best regards,
  Stefan Reinauer

Stefan Reinauer  writes:
> Note, it says it's doing interleaving. Funny enough, it also interleaves
> with one DIMM module.

If it is a double sided module this is quite possible.  It is
interleaving the chip selects.

If it did not do this in it's last incarnation this certainly
looks like an update may have broken something.

If my solo had not died I would test this.

Eric