[I don't know if you meant to take this offlist, but I think it's better it stays there so anyone wondering the status in the future can read the archives]
On Mon, Sep 26, 2005 at 03:53:19AM -0700, John Galloway wrote:
On Sep 26, 2005, at 1:10 AM, Jonathan McDowell wrote:
On Sun, Sep 25, 2005 at 03:35:38PM -0700, John Galloway wrote:
I'm looking at attempting to use LinuxBIOS to boot my VIA EPIA-MII10000 from the CF slot (a common desire among MII users, but with little success it seems). The EPIA-MII IS in the supported motherboards list, but targets/via only has an entry for epia and epia-m, no epia-mii. The M and the MII are different enough that I can't see them using the same target config. What gives?
I thought the main difference between the M and the M-II was the addition of the cardbus bridge for the CF/PCMCIA slots? What other differences are there?
Oh, none I guess (I thought there was more but checking the specs, now, I don't see it) but that was in fact the difference that concerns me since I want to boot off the CF slot.
There's old code for the bridge in src/southbridge/ricoh/rl5c476/ but I don't think it even compiles at present.
but now I don't see why LinuxBIOS cares about that since its FILO that will be loading the kernel off CF, so now I'm not sure that even that matters.
But FILO doesn't setup any of the low level hardware. You need LinuxBIOS to initialise the cardbus bridge and then map the CF slot appropriately so that the IDE code in FILO can talk to your CF device.
what was the code that doesn't compile for? (I suspect once I hit send all this will make sense but just now I seem to have lost it).
It looks like it does initial configuration of the bridge and maps the CF card to 0x1E8->0x1F0. I don't have an EPIA-MII so I've only looked at it just now.
J.
On Mon, Sep 26, 2005 at 01:19:07PM +0100, Jonathan McDowell wrote:
[I don't know if you meant to take this offlist, but I think it's better it stays there so anyone wondering the status in the future can read the archives]
The company I work for is currently sponsoring a developer to help update the MII code line in LinuxBios V2. There should be updates in about 3 weeks, if all goes well.
This is a great board to work with. It's got everything and the, "kitchen sink". There are alot of people using it for MythTV (via miniMyth), for example. We use it for a mobile PC application.
On Sep 26, 2005, at 5:46 AM, pj@cassens.com wrote:
On Mon, Sep 26, 2005 at 01:19:07PM +0100, Jonathan McDowell wrote:
The company I work for is currently sponsoring a developer to help update the MII code line in LinuxBios V2. There should be updates in about 3 weeks, if all goes well.
Excellent! I'll hold off till that work is ready (I'll be happy to help test)
This is a great board to work with. It's got everything and the, "kitchen sink". There are alot of people using it for MythTV (via miniMyth), for example. We use it for a mobile PC application.
I agree, though I'm using it for robotics -jrg
-
John Galloway -
Jonathan McDowell -
pj＠cassens.com