r1057 - in coreboot-v3/arch/x86: . intel/core2

Author: hailfinger
Date: 2008-11-26 00:39:31 +0100 (Wed, 26 Nov 2008)
New Revision: 1057

Modified:
   coreboot-v3/arch/x86/intel/core2/stage0.S
   coreboot-v3/arch/x86/stage1.c
Log:
The Core2Duo CAR code did set up the stack incorrectly. In combination
with a wrong calling convention of stage1_phase1() this caused stage1 to
assume BIST had failed.

Signed-off-by: Carl-Daniel Hailfinger 
Acked-by: Ronald G. Minnich

Modified: coreboot-v3/arch/x86/intel/core2/stage0.S
===================================================================
--- coreboot-v3/arch/x86/intel/core2/stage0.S	2008-11-25 23:10:24 UTC (rev 1056)
+++ coreboot-v3/arch/x86/intel/core2/stage0.S	2008-11-25 23:39:31 UTC (rev 1057)
@@ -3,6 +3,7 @@
  * 
  * Copyright (C) 2000,2007 Ronald G. Minnich 
  * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2008 Carl-Daniel Hailfinger
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -159,17 +160,26 @@
    movl	$(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %eax
    movl	%eax, %esp

-	/* Restore the BIST result */
+	/* Store zero for the pointer to the global variables. */
+	pushl   $0
+
+	/* Restore the BIST result. */
    movl	%ebp, %eax
+
+	/* We need to set ebp? No need. */
    movl	%esp, %ebp
+
+	/* Second parameter: init_detected */
+	/* Store zero for the unused init_detected parameter. */
+	pushl	$0
+
+	/* First parameter: bist */
    pushl	%eax

-#if 0
-	/* this will be interpreted as failed bist */
    port80_post(0x23)
-#endif

call	stage1_phase1
+	/* We will not go back. */

port80_post(0x2f)
 error:

Modified: coreboot-v3/arch/x86/stage1.c
===================================================================
--- coreboot-v3/arch/x86/stage1.c	2008-11-25 23:10:24 UTC (rev 1056)
+++ coreboot-v3/arch/x86/stage1.c	2008-11-25 23:39:31 UTC (rev 1057)
@@ -187,7 +187,7 @@
  * that we are restarting after some sort of reconfiguration. Note that we could use it on geode but 
  * do not at present. 
  */
-void __attribute__((stdcall)) stage1_phase1(u32 bist, u32 init_detected)
+void __attribute__((stdcall,regparm(0))) stage1_phase1(u32 bist, u32 init_detected)
 {
    struct global_vars globvars;
    int ret;