Re: [coreboot] Chromebox debugging.

[Kyösti Mälkki]

On 01/24/2014 12:18 PM, Timothy Potter wrote:
> Sorry for not including all you asked for Kyösti,  I've not had much time
> to spend on this.  So you are saying if lsusb -v reports a 'Debug
> descriptor' I should be able to use that port as the EHCI debug port on the
> target?

Hi

I think my first reply was quite clear on what information I need to 
assist you solve it. But I am too close to see if some obvious details 
from my instructions were missing.

This is more easily solved if you come to discuss on #coreboot. You 
should then write a tutorial for our wiki or at least reply here with 
the steps were you went wrong the first time.

Kyösti

Chromebox debugging.

[Timothy Potter]

Hi Kyosti,
   Sorry, I reread your first reply and it became clear what you meant when
looking on the Chomebox's /var/log directory.  I found the port at the back
corner of the Chromebox is numbered  2-1.2.  None of the external ports
connect as 1-1.2.  Connecting the phone with the EHCI debug device enabled
kernel to the 2-1.2 port and booting Ubuntu on the Chromebox I see the
following in kmesg:

[    2.008799] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd

[    2.031628] atkbd serio0: atkbd: SETLEDS failed

[    2.049059] init: plymouth main process (93) killed by ABRT signal

[    2.049409] init: plymouth-splash main process (398) terminated with
status 2

[    2.094946] usb 2-1.2: unable to read config index 0 descriptor/start:
-32

[    2.097301] usb 2-1.2: chopping to 0 config(s)

[    2.099611] usb 2-1.2: New USB device found, idVendor=0525,
idProduct=c0de

[    2.099615] usb 2-1.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0

[    2.100136] usb 2-1.2: no configuration chosen from 0 choices

I can post the full logs if needed but they are quite long.

I tried different values for CONFIG_USBDEBUG_HCD_INDEX on the Coreboot
build.  I tried values of 0,1 & 2 but still didn't see any output on the
EHCI debug device with 'cat /dev/ttyGS0'

Regards,
  Tim.

On Fri, Jan 24, 2014 at 4:41 PM, Kyösti Mälkki wrote:
> On 01/24/2014 12:18 PM, Timothy Potter wrote:
> > Sorry for not including all you asked for Kyösti,  I've not had much time
> > to spend on this.  So you are saying if lsusb -v reports a 'Debug
> > descriptor' I should be able to use that port as the EHCI debug port on
> > the
> > target?
>
> Hi
>
> I think my first reply was quite clear on what information I need to
> assist you solve it. But I am too close to see if some obvious details from
> my instructions were missing.
>
> This is more easily solved if you come to discuss on #coreboot. You should
> then write a tutorial for our wiki or at least reply here with the steps
> were you went wrong the first time.
>
> Kyösti