[ 2.031628] atkbd serio0: atkbd: SETLEDS failed
[ 2.049059] init: plymouth main process (93) killed by ABRT signal
[ 2.049409] init: plymouth-splash main process (398) terminated with status 2
[ 2.094946] usb 2-1.2: unable to read config index 0 descriptor/start: -32
[ 2.097301] usb 2-1.2: chopping to 0 config(s)
[ 2.099611] usb 2-1.2: New USB device found, idVendor=0525, idProduct=c0de
[ 2.099615] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.100136] usb 2-1.2: no configuration chosen from 0 choices
I can post the full logs if needed but they are quite long.
On 01/24/2014 12:18 PM, Timothy Potter wrote:Hi
Sorry for not including all you asked for Kyösti, I've not had much time
to spend on this. So you are saying if lsusb -v reports a 'Debug
descriptor' I should be able to use that port as the EHCI debug port on the
target?
I think my first reply was quite clear on what information I need to assist you solve it. But I am too close to see if some obvious details from my instructions were missing.
This is more easily solved if you come to discuss on #coreboot. You should then write a tutorial for our wiki or at least reply here with the steps were you went wrong the first time.
Kyösti