RE: Weird K8 output

[YhLu]

MB Model?
HT routing table?

YH

-----Original Message-----
From: Stefan Reinauer [mailto:[e-mail]] 
Sent: Tuesday, November 02, 2004 12:06 PM
To: [e-mail]
Subject: Weird K8 output

Hi,

on a 4cpu K8 system I get the following output before the system hangs..

Is the machine drunk or are CPU1-3 just running away?

LinuxBIOS-1.1.7.0-fallback Tue Nov  2 20:34:14 CET 2004 starting...
setting up resource map....done.
Enabling routing table for node 00 done.
Enabling SMP settings
setup_remote_node: done
Renaming current temporary node to 01 done.
anabling routing table for node 01 dConlee.
 tRiennamgin g mcutrrrenrt
  emporary node to 02 done.
Enabling routing table for node 02 dConle.e
mRernaiminngg c urmretntr tre
 porary node to 03 done.
Enabling routing table for node 03 dColnee.a
iz04n ngod esm itnirtiral
  ed.
coherent_ht_finalize
done
PCI_DEV=(0,0x18,0) 0xb4=00030000
bus=00 id =74501022
bus=00 id =74601022
PCI_DEV=(0,0x19,0) 0xd4=000a0400

Stefan
_______________________________________________
Linuxbios mailing list
[e-mail]
http://www.clustermatic.org/mailman/listinfo/linuxbios

Weird K8 output

[Stefan Reinauer]

* YhLu  [041102 21:27]:
> done
> PCI_DEV=(0,0x18,0) 0xb4=00030000
> bus=00 id =74501022
> bus=00 id =74601022
> PCI_DEV=(0,0x19,0) 0xd4=000a0400

Hm.. it dies here while collapsing the previous enumeration.

adding more debug now...

Stefan

Weird K8 output

[Stefan Reinauer]

* Stefan Reinauer  [041103 00:49]:
> YhLu  [041102 21:27]:
> > done
> > PCI_DEV=(0,0x18,0) 0xb4=00030000
> > bus=00 id =74501022
> > bus=00 id =74601022
> > PCI_DEV=(0,0x19,0) 0xd4=000a0400
>
> Hm.. it dies here while collapsing the previous enumeration.

While collapsing 74501022 again...

Can anyone shed some light on why the repeated collapse is needed?

Stefan