答复: Two console in com1 and com2 in

[YhLu]

Thanks,

Current our Server Management Daughter card (SMDC or IPMI card) is using
COM2 on MB to do Console redirection via LAN. So If using LinuxBIOS, I also
hope the user use COM1 for on site Console using if he he wants.

Regards

YH

-----邮件原件-----
发件人: [e-mail] [mailto:[e-mail]] 
发送时间: 2004年1月15日 22:11
收件人: YhLu
抄送: ron minnich; [e-mail]
主题: Re: Two console in com1 and com2 in

YhLu  writes:
> Eric,
>
> I wonder if it is possible to have two consoles and one is in com1 and the
> other is in com2, and maybe in different baud rate.
>
> I mean in LinuxBIOS should be OK if I add another uart8250_console2.c. but
> how about Etherboot, Does it support that? Or just can only use one port?

Etherboot would need similar modifications but it can support two
consoles as well.  What would be the gain in having two serial consoles?

Eric