[LinuxBIOS] r2808 - trunk/util/superiotool

Author: uwe
Date: 2007-09-26 17:48:09 +0200 (Wed, 26 Sep 2007)
New Revision: 2808

Modified:
   trunk/util/superiotool/fintek.c
Log:
Dump support for the Fintek F71805 (trivial).

Signed-off-by: Uwe Hermann 
Acked-by: Uwe Hermann

Modified: trunk/util/superiotool/fintek.c
===================================================================
--- trunk/util/superiotool/fintek.c	2007-09-25 01:31:35 UTC (rev 2807)
+++ trunk/util/superiotool/fintek.c	2007-09-26 15:48:09 UTC (rev 2808)
@@ -29,6 +29,35 @@

const static struct superio_registers reg_table[] = {
    {0x0604, "F71805", {
+		/* We assume reserved bits are read as 0. */
+		{NOLDN, NULL,
+			{0x07,0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,
+			 0x29,EOT},
+			{NANA,0x04,0x06,0x19,0x34,0x00,0x00,0x3f,0x08,
+			 0x00,EOT}},
+		{0x0, "Floppy",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT},
+			{0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}},
+		{0x1, "COM1",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x01,0x03,0xf8,0x04,0x00,EOT}},
+		{0x2, "COM2",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+			{0x01,0x02,0xf8,0x03,0x00,0x04,EOT}},
+		{0x3, "Parallel port",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+			{0x01,0x03,0x78,0x07,0x03,0x42,EOT}},
+		{0x4, "Hardware monitor",
+			{0x30,0x60,0x61,0x70,EOT},
+			{0x00,0x02,0x95,0x00,EOT}},
+		{0x6, "GPIO",
+			{0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
+			 0xe9,0xf0,0xf1,0xf3,0xf4,EOT},
+			{0x00,0x00,0x00,NANA,0x00,0x00,0x00,0x00,0x00,0x00,
+			 0x00,0x00,NANA,0x00,NANA,EOT}},
+		{0xa, "PME",
+			{0x30,0xf0,0xf1,EOT},
+			{0x00,0x00,0x00,EOT}},
    	{EOT}}},
    {0x4103, "F71872", {
    	{EOT}}},