RE: Removing device driver code in mainboard.c for Tyan boards?

[YhLu]

Please check the si/3114

I guess you need to keep
Ati
Si
Trident

Regards

YH

-----Original Message-----
From: YhLu 
Sent: Thursday, November 04, 2004 12:37 PM
To: Li-Ta Lo
Cc: LinuxBIOS
Subject: RE: Removing device driver code in mainboard.c for Tyan boards?

Yes, We still need some, I will give a example about SI image chip.

Regards

YH

-----Original Message-----
From: Li-Ta Lo [mailto:[e-mail]] 
Sent: Thursday, November 04, 2004 12:05 PM
To: YhLu
Cc: LinuxBIOS
Subject: RE: Removing device driver code in mainboard.c for Tyan boards?

On Thu, 2004-11-04 at 10:45, YhLu wrote:
> OK for me.
>
> Some line I want to use print mem or pci at the end of LinuxBIOS can not

be
> used now. Eric removed the CHIP_PASS....

I guess we don't need the driver/intel|si||adaptec|boradcom anymore ?

Ollie
> Regards
>
> YH
>
> -----Original Message-----
> From: Li-Ta Lo [mailto:[e-mail]] 
> Sent: Thursday, November 04, 2004 9:07 AM
> To: YhLu; LinuxBIOS
> Subject: Removing device driver code in mainboard.c for Tyan boards?
>
> YhLu,
>
> Now we have a totally new device driver architecture, could we remove 
> those #if 0 #endf code in the mainboard.c for Tyan board?
>
> Ollie

_______________________________________________
Linuxbios mailing list
[e-mail]
http://www.clustermatic.org/mailman/listinfo/linuxbios

Removing device driver code in mainboard.c for Tyan boards?

[Li-Ta Lo]

On Thu, 2004-11-04 at 14:08, YhLu wrote:
> Please check the si/3114
>
> I guess you need to keep
> Ati
> Si
> Trident

Why you put the debug_device back ?

Ollie

Removing device driver code in mainboard.c for Tyan boards?

[Li-Ta Lo]

On Thu, 2004-11-04 at 14:08, YhLu wrote:
> Please check the si/3114
>
> I guess you need to keep
> Ati
> Si
> Trident

The si_sata.c only enable the BM DMA. Are you going to do something
more ?

Ollie