[LinuxBIOS] Ck804 PCI-E External Plugin Causes Failure

[steve yannalfo]

My System seems to running good. My devices are found, onboard vga comes up @ kernel setfont, lans detected and working, amd8132 working etc. The problem is when I plug in  a pci-e card on the ck804 external  pci-e connector. LB dies @:
----------------------------------
scan_static_bus for PCI: 04:01.1 done
do_pci_scan_bridge for PCI: 04:09.0
PCI: Scanning Bus 5
<<DEAD HERE>>
----------------------------------

localhost ~ # lspci -t
-+-[0000:04]-+-00.0
 |           +-01.0
 |           +-01.1
 |           +-02.0
 |           +-02.1
 |           +-04.0
 |           +-04.1
 |           +-06.0
 |           +-07.0
 |           +-08.0
 |           +-09.0-[0000:05]--                        <<<< TERMINATED
 |           +-0a.0
 |           +-0b.0-[0000:06]----00.0
 |           +-0c.0-[0000:07]--
 |           +-0d.0-[0000:08]----00.0
 |           -0e.0-[0000:09]--                        <<<< EXTERNAL PCI-E
 +-[0000:01]-+-01.0-[0000:02]----0c.0
 |           +-01.1
 |           +-02.0-[0000:03]----01.0
 |           -02.1
 -[0000:00]-+-18.0
             +-18.1
             +-18.2
             +-18.3
             +-19.0
             +-19.1
             +-19.2
             -19.3

So, LB is scanning 04:09.0 which is BUS-5 which is terminated on the MB because not used.
The External PCI-E is on 4:0e.0... so why is LB crashing on 4:09.0 if I plug a card into 04:0e.0?

please help
tia
steve

---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.