the fan of my x60 tablet wasn't working under coreboot. i got it spinning by adding the following:[1]
$ cat /etc/modprobe.d/thinkpad-fan.conf options thinkpad_acpi fan_control=1
(then reboot.) you can then see something like the following here:
$ cat /proc/acpi/ibm/fan status: enabled speed: 2488 level: auto commands: level <level> (<level> is 0-7, auto, disengaged, full-speed) commands: enable, disable commands: watchdog <timeout> (<timeout> is 0 (off), 1-120 (seconds))
$ cd /sys/class/hwmon/hwmon1/device ; ls
problem: fan speeds appear to be incorrect. my fan also seems too slow.
i've been tinkering with thinkfan and fancontrol, but they don't survive a full stress test.[2]
does anyone else have slow fan problems? is it something i should replace? i may have mildly borked my EC by flashing the EC for an x60 then the correct x60t EC over it. any advice is welcome.
thanks, -andrew
p.s. (it seems like kernel fan control is disabled without the module option, when using coreboot or the oem bios. the vendor bios gives some auto fan action, but it's often too slow.)
[1] source: https://bbs.archlinux.org/viewtopic.php?pid=1169414#p1169414 [2] resource: https://wiki.archlinux.org/index.php/Fan_Speed_Control
-
Andrew Engelbrecht