That's right.
YH
-----邮件原件----- 发件人: Stefan Reinauer [mailto:stepan@suse.de] 发送时间: 2004年3月24日 7:36 收件人: YhLu 抄送: ebiederman@lnxi.com; ron minnich; linuxbios@clustermatic.org 主题: Re: ??????: S4882 support
* YhLu YhLu@tyan.com [040324 04:57]:
It seems the soft reset didn't rest the MB and ...
Ollie,
Can you check that in S2885? And I think if you changed the hard_reset and soft_reset to bus 1, it may not rest the ht.
I've changed the reset code today so that the same code is used on all K8+AMD8111 systems
reset.c went to southbridge/amd/amd8111/amd8111_reset.c
In the config file, you can now specify the device doing the hard reset, instead of copy+write the reset code for every new mainboard:
default HARD_RESET_BUS=1 default HARD_RESET_DEVICE=5 default HARD_RESET_FUNCTION=0
It would be a lot nicer to find the device dynamically. Maybe that can get fixed together with dynamically creating pirq and the other tables some day..
The Tyan boards currently assume the 8111 reset logic is available at following positions on the PCI bus:
s2850 1:2.0 s2880 1:4.0 s2881 1:4.0 s2882 1:4.0 s2885 3:4.0 s4880 1:4.0
Yinghai, is this correct?
Stefan
-
YhLu