Hi to all, I had this problem: when I start the computer with 1 cpu (opteron 6282se) everything is fine, if I add the second CPU, the computer doesn't boot, did you have any suggestions? I put only 2 rams module, following the Asus kgpe d16 manual, is that the correct order (one in the first and one in the last orange socket)?
Thank you very much Dave
What's the does not boot point to? Stuck in POST with some serial log, or not even CPU is running.
d.verdi via coreboot coreboot@coreboot.org 于2020年11月24日周二 上午6:49写道：
Hi to all, I had this problem: when I start the computer with 1 cpu (opteron 6282se) everything is fine, if I add the second CPU, the computer doesn't boot, did you have any suggestions? I put only 2 rams module, following the Asus kgpe d16 manual, is that the correct order (one in the first and one in the last orange socket)?
Thank you very much Dave _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
-
d.verdi -
Lance Zhao