Hi Guys,
Coolstar Organisation wants to do his Windows thang with one of the Broadwell Chromebooks, so I'm trying to build a working ROM with https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/firmware... to give him a hand. Luckily USB debug works with this, so here is what I'm getting. What could I do next?
-John.
coreboot-5cbe3a8-dirty romstage Sun Aug 23 12:18:55 BST 2015 starting...
PM1_STS: 8910
PM1_EN: 0000
PM1_CNT: 00000000
TCO_STS: 0000 0000
GPE0_STS: 1ef82df0 187d4fdf 0005f240 00000000
GPE0_EN: 00000000 00000000 00000000 00000000
GEN_PMCON: 0200 2024 520b
Previous Sleep State: S5
CPU: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz
CPU: ID 306d4, Broadwell E0 or F0, ucode: 0000001d
CPU: AES supported, TXT NOT supported, VT supported
MCH: device id 1604 (rev 09) is Broadwell F0
PCH: device id 9cc5 (rev 03) is Broadwell U Base
IGD: device id 1616 (rev 09) is Broadwell U GT2
CPU: frequency set to 2000 MHz
SPD: index 1 (GPIO47=0 GPIO9=0 GPIO13=1)
SPD: module type is DDR3
SPD: module part is HMT425S6AFR6A-PB
SPD: banks 8, ranks 1, rows 15, columns 10, density 4096 Mb
SPD: device width 16 bits, bus width 64 bits
SPD: module size is 2048 MB (per channel)
Boot Count incremented to 8
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : NO
ME: Manufacturing Mode : NO
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Normal
ME: Current Operation State : Bring up
ME: Current Operation Mode : Normal
ME: Error Code : No Error
ME: Progress Phase : BUP Phase
ME: Power Management Event : Pseudo-global reset
ME: Progress Phase State : Waiting for DID BIOS message
ME: HSIO Version : 8705 (CRC 0xfbc2)
No FMAP found at ffe10000.
FMAP: area RW_MRC_CACHE not found
No MRC cache found.
Starting Memory Reference Code
Initializing Policy
Installing common PPI
MRC: Starting...
Initializing Memory
MRC: Done.
MRC Version 2.6.0 Build 0
memcfg DDR3 clock 1600 MHz
memcfg channel assignment: A: 0, B 1, C 2
memcfg channel[0] config (00780008):
enhanced interleave mode on
rank interleave on
DIMMA 2048 MB width x16 single rank, selected
DIMMB 0 MB width x16 single rank
memcfg channel[1] config (00780008):
enhanced interleave mode on
rank interleave on
DIMMA 2048 MB width x16 single rank, selected
DIMMB 0 MB width x16 single rank
CBMEM: root @ 7cfff000 254 entries.
MRC data at ff7d0d9c 6246 bytes
Relocate MRC DATA from ff7d0d9c to 7cfeb000 (6246 bytes)
create cbmem for dimm information
-
John Lewis