Re: [LinuxBIOS] MSI K8N Neo4-F (PCB 1.0)

[Lu, Yinghai]

It could be supported.

1. Ck804 support is in the tree.
2. athlon64 support is in the tree. But need to check to make it support
1 above dimms
3. Athlon64 FX support need to use fidvid to set correct FID, otherwise
it will only run at low freq. ---- we need to provide
enable_fid_change_on_sb for Ck804.

You can start from make a clone mb and target dir for it from tyan
s2891...

YH