Patch set updated for coreboot: cc71032 Fix whitespace issue with help message in Kconfig file

[Dave Frodin]

Dave Frodin ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1687

-gerrit

commit cc710328fa2d555c0326c1e6afbc120736108966
Author: Dave Frodin 
Date:   Tue Nov 6 13:37:08 2012 -0700

Fix whitespace issue with help message in Kconfig file

Every line of text after a 'help' label in a Kconfig
    file must have the same whitespace preceding it, otherwise
    it's no longer considered help text.

Change-Id: I97093bee72b295b315d78d4c26d7186bf1017fda
    Signed-off-by: Dave Frodin 
---
 src/southbridge/amd/agesa/hudson/Kconfig | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig
index f58f920..4afe377 100644
--- a/src/southbridge/amd/agesa/hudson/Kconfig
+++ b/src/southbridge/amd/agesa/hudson/Kconfig
@@ -95,17 +95,17 @@ config HUDSON_FWM_POSITION
         default 0xFF820000 if BOARD_ROMSIZE_KB_8192
         default 0xFF020000 if BOARD_ROMSIZE_KB_16384
    help
-          Hudson requires the firmware MUST to be located at
+	  Hudson requires the firmware MUST be located at
      a specific address (ROM start address + 0x20000), otherwise
      xhci host Controller can not find or load the xhci firmware.

The firmware start address is dependent on the ROM chip size.
      The default offset is 0x20000 from the ROM start address, namely
-           0xFFF20000 if flash chip size is 1M
-           0xFFE20000 if flash chip size is 2M
-           0xFFC20000 if flash chip size is 4M
-           0xFF820000 if flash chip size is 8M
-           0xFF020000 if flash chip size is 16M
+	  0xFFF20000 if flash chip size is 1M
+	  0xFFE20000 if flash chip size is 2M
+	  0xFFC20000 if flash chip size is 4M
+	  0xFF820000 if flash chip size is 8M
+	  0xFF020000 if flash chip size is 16M
 endif

choice