Solo tests with 1.1.5 fail

[Stefan Reinauer]

Hi,

I get reboots again, this time it's not dependent on the gcc version I
use.. Eric, there are some weird bits in the attached log, can you help
to interpret them? From what I see some the SuperIO setup has severe
trouble, and some of the resources seem to be given out twice...

Stefan

[Stefan Reinauer]

* Stefan Reinauer  [031013 13:08]:
> Hi,
>
> I get reboots again, this time it's not dependent on the gcc version I
> use.. Eric, there are some weird bits in the attached log, can you help
> to interpret them? From what I see some the SuperIO setup has severe
> trouble, and some of the resources seem to be given out twice...

Ok, I enabled the hard reset function for AMD Solo, and this changes the
resulting behaviour noticably. No more endless rebooting, but a reboot
plus hang after complete pci init.

It seems the AGP brigde is initialized correctly though, the graphics
card is there...

Stefan

[Stefan Reinauer]

* Stefan Reinauer  [031015 16:25]:
> Ok, I enabled the hard reset function for AMD Solo, and this changes the
> resulting behaviour noticably. No more endless rebooting, but a reboot
> plus hang after complete pci init.
>
> It seems the AGP brigde is initialized correctly though, the graphics
> card is there...

another step... Setting the link and order of the 8151 correctly(?) in 
Config.lb I get  to the second reset (NB: Function 3..) before it hard
halts..

logs attached.

Best regards,
  Stefan Reinauer