ÿ

LinuxBIOS-1.1.5.0-Fallback Do Okt 16 15:21:18 CEST 2003 starting...
setting up resource map....
done.
Enabling routing table for node 00000000 done.
Enabling UP settings
Disabling read/write/fill probes for UP... done.
coherent_ht_finalize
done
SMBus controller enabled
Ram1.00
setting up CPU00 northbridge registers
done.
Ram2.00
disabling dimm01
disabling dimm01
133Mhz
disabling dimm01
Interleaved
RAM: 0x00040000 KB
Ram3
Initializing memory:  done
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.5.0-Fallback Do Okt 16 15:21:18 CEST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD 8111
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
amdk8_scan_chains max: 0 starting...
Hyper transport scan link: 0 max: 1
PCI: 01:01.0 [1022/7454] enabled next_unitid: 0004
PCI: 01:04.0 [1022/7460] enabled next_unitid: 0008
HyperT reset needed


LinuxBIOS-1.1.5.0-Fallback Do Okt 16 15:21:18 CEST 2003 starting...
setting up resource map....
done.
Enabling routing table for node 00000000 done.
Enabling UP settings
Disabling read/write/fill probes for UP... done.
coherent_ht_finalize
done
SMBus controller enabled
Ram1.00
setting up CPU00 northbridge registers
done.
Ram2.00
disabling dimm01
disabling dimm01
133Mhz
disabling dimm01
Interleaved
RAM: 0x00040000 KB
Ram3
Initializing memory:  done
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.5.0-Fallback Do Okt 16 15:21:18 CEST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD 8111
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
amdk8_scan_chains max: 0 starting...
Hyper transport scan link: 0 max: 1
PCI: 01:01.0 [1022/7454] enabled next_unitid: 0004
PCI: 01:04.0 [1022/7460] enabled next_unitid: 0008
HyperT reset not needed
PCI: pci_scan_bus for bus 1
PCI: 01:01.0 [1022/7454] ops
PCI: 01:01.0 [1022/7454] enabled
PCI: 01:02.0 [1022/7455] bus ops
PCI: 01:02.0 [1022/7455] enabled
PCI: 01:04.0 [1022/7460] enabled
PCI: 01:05.0 [1022/7468] bus ops
PCI: 01:05.0 [1022/7468] enabled
PCI: 01:05.1 [1022/7469] ops
PCI: 01:05.1 [1022/7469] enabled
PCI: 01:05.2 [1022/746a] enabled
PCI: 01:05.3 [1022/746b] ops
PCI: 01:05.3 [1022/746b] enabled
PCI: 01:05.5 [1022/746d] enabled
PCI: 01:05.6 [1022/746e] enabled
PCI: pci_scan_bus for bus 2
PCI: 02:00.0 [1002/5157] enabled
PCI: pci_scan_bus returning with max=02
PCI: pci_scan_bus for bus 3
PCI: 03:00.0 [1022/7464] ops
PCI: 03:00.0 [1022/7464] enabled
PCI: 03:00.1 [1022/7464] ops
PCI: 03:00.1 [1022/7464] enabled
PCI: 03:00.2 [1022/7463] ops
PCI: 03:00.2 [1022/7463] enabled
PCI: 03:01.0 [1022/7462] enabled
PCI: 03:05.0 [14e4/1645] enabled
PCI: pci_scan_bus returning with max=03
PCI: pci_scan_bus returning with max=03
Hyper transport scan link: 0 new max: 3
Hypertransport scan link done
amdk8_scan_chains max: 3 done
PCI: pci_scan_bus returning with max=03
done
Allocating resources...
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
ASSIGN RESOURCES, bus 0
PCI: 00:18.0 c0 <- [0x00001000 - 0x00002fff] node 0 link 0 io
PCI: 00:18.0 b8 <- [0xe0000000 - 0xf81fffff] node 0 link 0 mem
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:18.0 c8 <- [0x00003000 - 0x00002fff] node 0 link 2 io
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:18.0 80 <- [0xf8200000 - 0xf81fffff] node 0 link 2 mem
ASSIGN RESOURCES, bus 1
PCI: 01:01.0 10 <- [0xe0000000 - 0xefffffff] prefmem
ASSIGN RESOURCES, bus 0
PCI: 00:00.0 missing set_resources
PCI: 00:00.1 missing set_resources
PCI: 00:00.2 missing set_resources
PCI: 00:01.0 missing set_resources
ASSIGNED RESOURCES, bus 0
PCI: 01:02.0 1c <- [0x00001000 - 0x00001fff] bus 2 io
PCI: 01:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 2 prefmem
PCI: 01:02.0 20 <- [0xf8000000 - 0xf80fffff] bus 2 mem
ASSIGN RESOURCES, bus 2
PCI: 02:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem
PCI: 02:00.0 14 <- [0x00001000 - 0x000010ff] io
PCI: 02:00.0 18 <- [0xf8000000 - 0xf800ffff] mem
ASSIGNED RESOURCES, bus 2
PCI: 01:04.0 1c <- [0x00002000 - 0x00001fff] bus 3 io
PCI: 01:04.0 24 <- [0xf8200000 - 0xf81fffff] bus 3 prefmem
PCI: 01:04.0 20 <- [0xf8100000 - 0xf81fffff] bus 3 mem
ASSIGN RESOURCES, bus 3
PCI: 03:00.0 10 <- [0xf8110000 - 0xf8110fff] mem
PCI: 03:00.1 10 <- [0xf8111000 - 0xf8111fff] mem
PCI: 03:00.2 10 <- [0xf8113000 - 0xf81130ff] mem
PCI: 03:00.2 14 <- [0xf8114000 - 0xf811401f] mem
PCI: 03:01.0 10 <- [0xf8112000 - 0xf8112fff] mem
PCI: 03:05.0 10 <- [0xf8100000 - 0xf810ffff] mem
ASSIGNED RESOURCES, bus 3
PCI: 01:05.0 00 <- [0x00000000 - 0xffffffff] io
PCI: 01:05.0 00 <- [0x00000000 - 0xffffffff] mem
PCI: 01:05.1 20 <- [0x000028e0 - 0x000028ef] io
PCI: 01:05.2 10 <- [0x000028c0 - 0x000028df] io
PCI: 01:05.5 10 <- [0x00002000 - 0x000020ff] io
PCI: 01:05.5 14 <- [0x00002880 - 0x000028bf] io
PCI: 01:05.6 10 <- [0x00002400 - 0x000024ff] io
PCI: 01:05.6 14 <- [0x00002800 - 0x0000287f] io
ASSIGNED RESOURCES, bus 1
ASSIGN RESOURCES, bus 0
PCI: 00:00.0 missing set_resources
PCI: 00:01.0 missing set_resources
ASSIGNED RESOURCES, bus 0
ASSIGNED RESOURCES, bus 0
Allocating VGA resource
done.
Enabling resourcess...
PCI: 00:18.0 cmd <- 00
PCI: 01:01.0 cmd <- 06
PCI: 00:00.0 missing enable_resources
PCI: 00:00.1 missing enable_resources
PCI: 00:00.2 missing enable_resources
PCI: 00:01.0 missing enable_resources
PCI: 01:02.0 bridge ctrl <- 003e
PCI: 01:02.0 cmd <- 07
PCI: 02:00.0 cmd <- 83
PCI: 01:04.0 bridge ctrl <- 0000
PCI: 01:04.0 cmd <- 07
PCI: 03:00.0 cmd <- 02
PCI: 03:00.1 cmd <- 02
PCI: 03:00.2 cmd <- 02
PCI: 03:01.0 cmd <- 02
PCI: 03:05.0 cmd <- 02
PCI: 01:05.0 cmd <- 0f
PCI: 01:05.1 cmd <- 01
PCI: 01:05.2 cmd <- 01
PCI: 01:05.3 cmd <- 00
PCI: 01:05.5 cmd <- 01
PCI: 01:05.6 cmd <- 01
PCI: 00:00.0 missing enable_resources
PCI: 00:01.0 missing enable_resources
PCI: 00:18.1 cmd <- 00
PCI: 00:18.2 cmd <- 00
PCI: 00:18.3 cmd <- 00
done.
Initializing devices...
PCI: 00:18.3 init
NB: Function 3 Misc Control.. resetting cpu